VOOPOO VMATE Max 30W Pod Kit
The VMATE Max is the top of VOOPOO's VMATE line: 5-30W adjustable output, an internal 1200mAh battery, and a 3ml top-fill pod. It runs on the same pods as the rest of the family, so if you already own a VMATE you can keep the pods you have. Airflow is steplessly adjustable from a tight mouth-to-lung draw through to restricted direct lung.
Highlights
- 5-30W adjustable, resistance range 0.4ohm to 3.0ohm
- 1200mAh internal battery, 2A Type-C charging (VOOPOO rates 0-100% at roughly 33 minutes)
- Three modes: SPT for fuller flavor, NOR for everyday use, ECO to stretch battery and e-liquid
- Hidden Horizon OLED screen and dual 256-color light bars that go dark when the device is idle
- Zinc alloy body, magnetic pod connection, stepless airflow ring
- Ships with two pods, a 0.4ohm and a 0.7ohm
VMATE Max Specs
| Spec | Detail |
|---|---|
| Wattage | 5-30W, adjustable |
| Battery | 1200mAh internal, non-removable |
| Charging | USB Type-C, 2A |
| Voltage | 3.2-4.2V |
| Resistance range | 0.4ohm to 3.0ohm |
| Pod capacity | 3ml, top fill |
| Modes | SPT, NOR, ECO |
| Display | Hidden Horizon OLED, dual 256-color light bars |
| Operation | Draw activated |
| Body | Zinc alloy, magnetic pod connection, stepless airflow |
| Protection | 7-point circuit protection (overtime, short circuit, overcharge and others) |
Pods That Fit
| Pod | Resistances | Fill | Notes |
|---|---|---|---|
| VMATE Top Fill Pod | 0.4ohm, 0.7ohm, 1.0ohm | Top slide fill | The pods the kit ships with. Sold as a 2-pack |
| VMATE V2 Pod | 0.7ohm mesh, 1.2ohm GENE Helix | Side fill | The older family pod. Single or 2-pack |
Both pod families carry across the VMATE lineup, so the same pods work in the VMATE Pro and VMATE Infinity as well.
Which Resistance to Start With
| Resistance | Wattage | Best For |
|---|---|---|
| 0.4ohm | 18-30W | Restricted direct lung, freebase e-liquid |
| 0.7ohm | 15-25W | Looser mouth-to-lung, salt or freebase |
| 1.0ohm | 12-18W | Tighter mouth-to-lung, nic salt |
In the Box
- VMATE Max device
- 1x 0.4ohm VMATE Top Fill pod
- 1x 0.7ohm VMATE Top Fill pod
- Type-C cable
- User manual
Why Shop VOOPOO at Central Vapors
We keep all three VMATE Top Fill resistances stocked alongside the kit, so replacement pods are a reorder rather than a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q |
Which pods fit the VMATE Max?
Both VMATE pod families. The VMATE Top Fill pod in 0.4ohm, 0.7ohm, or 1.0ohm, and the older VMATE V2 pod in 0.7ohm mesh or 1.2ohm GENE Helix. The kit ships with the top-fill style.
|
| Q |
What do SPT, NOR, and ECO do?
They change how the device drives the coil. SPT pushes for fuller flavor, NOR is the balanced everyday setting, and ECO pulls power back to stretch both battery and e-liquid.
|
| Q |
Which resistance should I use for nic salt?
The 1.0ohm top-fill pod at 12-18W is the tightest draw in the top-fill range and the usual pick for salt nic. On the V2 pod, that is the 1.2ohm GENE Helix.
|
| Q |
How do I refill it?
Slide open the silicone stopper on the top of the pod and fill from there. The pod stays in the device.
|
| Q |
How long does a charge take?
VOOPOO rates the 1200mAh battery at about 33 minutes from empty to full over 2A Type-C. Real-world time depends on the charger you plug into.
|
| Q |
Does the screen stay lit?
No. The Hidden Horizon OLED and the two light bars show through the front panel while you are using the device and go dark when it sits idle.
|
For use by adults 21+.
