VOOPOO Vmate Infinity Pod Kit
The Infinity is the small, simple end of the Vmate line. No buttons and no menus: 900mAh of battery, up to 17W, draw activated. The aluminum alloy body measures 95.5 x 28.5 x 15mm, which is pocket-sized in the literal sense. It runs the Vmate V2 pod, the same integrated-coil pod the rest of the family uses, so pods stay easy to reorder.
- Up to 17W output, draw activated, nothing to set up
- 900mAh internal battery, USB Type-C charging
- GENE.AI chipset, resistance range 0.7ohm to 3.0ohm
- 3ml Vmate V2 pod, side fill under a silicone stopper
- Aluminum alloy body, magnetic pod connection, LED battery indicator
- Ships with one 0.7ohm pod
Vmate Infinity Specs
| Spec | Detail |
|---|---|
| Wattage | Up to 17W |
| Battery | 900mAh internal, non-removable |
| Charging | USB Type-C |
| Voltage | 3.2-4.2V |
| Resistance range | 0.7ohm to 3.0ohm |
| Pod capacity | 3ml, side fill |
| Chipset | GENE.AI |
| Dimensions | 95.5 x 28.5 x 15mm |
| Operation | Draw activated |
| Display | LED battery indicator |
| Body | Aluminum alloy, magnetic pod connection, silver-ion coated mouthpiece |
| Protection | Overtime, short circuit, overcharge, output over-current, low battery, chip over-temperature |
Pods That Fit
| Pod | Resistances | Fill | Notes |
|---|---|---|---|
| VMate V2 Pod | 0.7ohm mesh, 1.2ohm GENE Helix | Side fill | The kit ships with the 0.7ohm. Sold as a single pod or a 2-pack |
The V2 pod carries across the wider Vmate lineup, so the pods you buy for the Infinity are not stranded if you move up to a Vmate Max later.
Which Resistance to Start With
| Resistance | Coil Type | Best For |
|---|---|---|
| 0.7ohm | Mesh | Freebase e-liquid, denser vapor |
| 1.2ohm | GENE Helix | Nic salt, tighter mouth-to-lung draw |
In the Box
- Vmate Infinity device
- 1x 0.7ohm Vmate V2 pod
- Type-C cable
- User manual
Why Shop VOOPOO at Central Vapors
We stock both V2 resistances alongside the kit, so a replacement pod is a reorder rather than a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q |
Which pods does the Vmate Infinity take?
The VMate V2 pod, in 0.7ohm mesh or 1.2ohm GENE Helix. The kit ships with the 0.7ohm.
|
| Q |
Is there a fire button?
No. It fires on the draw, so there is nothing to press.
|
| Q |
How do I refill the pod?
Through the side fill port, under the silicone stopper.
|
| Q |
Which resistance should I pick for nic salt?
The 1.2ohm GENE Helix. It runs a tighter, cooler draw that suits salt e-liquid.
|
For use by adults 21+.
