Skip to main content

WARNING: This product contains nicotine. Nicotine is an addictive chemical.

CALL US ON 469-828-7307
VOOPOO PnP Replacement Coils

VOOPOO

In stock

VOOPOO PnP Replacement Coils

4 (187 reviews) Write a Review
$12.45

ShippingFREE $95+ · ½-price $50+ · else $9.99DeliveryShips within 48 hrs (order by 12pm CT, Mon–Fri) · arrives in 2–7 business days. Shipping details

Adding to cart… The item has been added

Key Specs

Fits Devices UForce L-Tank, Vinci 3 Kit, Drag X 80W Kit, Drag S 60W Kit, Argus Pro Kit, Argus GT 2 200W Kit, Drag H40 Kit, Drag E60 Kit + 5 more
Resistance Options 0.15Ω, 0.2Ω, 0.3Ω, 0.45Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω
Wattage Range 10-80W
Draw Style MTL & DTL
Coil Type Mesh
Pack Size Single Coil, 5-Pack

VOOPOO PnP Replacement Coils

Genuine VOOPOO PnP coils in 17 core types, from a 0.15Ω mesh built for heavy cloud production down to a 1.2Ω MTL coil built for a tight, cigarette-like draw. Match the coil to your device's wattage range and how you actually vape — the full breakdown is below.

Before you order: check your device can actually reach the coil's rated wattage. A coil run below its minimum wattage delivers weak vapor and a burnt taste no matter how new it is.

Coil Options

CoreTypeResistanceWattage RangeStyle
VM6 Mesh 0.15Ω 60-80W DL
TW15 Mesh 0.15Ω 55-70W DL
VM5 Mesh 0.2Ω 40-60W DL
TW20 Mesh 0.2Ω 40-55W DL
VM1 Mesh 0.3Ω 32-40W DL
TW30 Mesh 0.3Ω 28-36W DL/RTL
VM3 Mesh 0.45Ω 25-35W DL
VM4 Mesh 0.6Ω check tank manual Half DL
TM1 Regular 0.6Ω 20-25W Half DL
DW60 Regular 0.6Ω 18-23W RDL
TM2 Regular 0.8Ω 12-18W Half DL
R1 Regular 0.8Ω 12-18W MTL
DW80 Regular 0.8Ω 12-16W MTL
R2 Regular 1.0Ω 10-15W MTL
TR1 Regular 1.2Ω 10-15W MTL
VM2 Regular 1.2Ω check tank manual MTL
RBA Rebuildable 0.25–2.0Ω build your own —

Compatible With

VOOPOO Drag X • Drag S • Drag 4 • Drag Max • Drag H40 • Drag H80S Kit • Drag E60 Kit • Drag Baby Trio • Vinci • Vinci R • Vinci X • Vinci X2 • Vinci 2 • Vinci 3 Kit • Argus 40W • Argus Air • Argus Pro 80W • UForce-L Tank • V.SUIT • PnP Pod Tank • Navi

FAQ

Q
What's the difference between Mesh and Regular coils?
Mesh coils (the VM and TW series) heat more evenly across a wider surface, which usually means brighter flavor and a faster ramp-up. Regular coils use a classic wire-wrapped build and tend to run at lower wattage.
Q
How do I know if I want DL or MTL?
DL (direct lung) is a big, airy draw straight to the lungs, like pulling through a straw — that's the sub-0.5Ω coils at higher wattage. MTL (mouth to lung) is a tighter draw you hold in your mouth first, closer to a cigarette — that's 0.8Ω and up at lower wattage.
Q
Do I need to prime a new coil before using it?
Yes. Apply a few drops of e-liquid directly to the exposed wicking holes and let it sit 5-10 minutes before your first vape, so the cotton fully saturates. Firing a dry coil can scorch the wick immediately.

Sold as a 5-pack. For use by adults 21+.

Questions & Answers

QWhy are there several coil options for the same tank, and how do I pick the right one?

Central Vapors Team · Jun 27, 2026

AThey're the same coil family in different resistances (ohms), each tuned for a different style — they all fit the same tank/pod. Lower-ohm coils (about 0.2–0.4Ω) are sub-ohm: run them at higher wattage for warm, big direct-lung clouds. Higher-ohm coils (about 0.8–1.2Ω and up) run at lower wattage for a tighter mouth-to-lung draw, cooler vapor, and longer battery life. So pick the resistance that matches the wattage and draw you like, and stay within each coil's recommended wattage range for the best flavor and coil life. Tip: confirm you're buying the exact coil family your device lists — coil names can differ between device generations. — Central Vapors

QHow do I prime a new coil or pod before I use it?

Central Vapors Team · Jun 27, 2026

ASaturate the wick first: add 3–5 drops of e-liquid onto the exposed cotton holes on the coil, install it, fill the tank/pod, then wait 5–10 minutes before your first puff. A few gentle primer puffs (device off, or at low power) help pull liquid into the wick. Always refill before it runs low. This is the #1 way to avoid a burnt taste. — Central Vapors

QMy new coil tastes burnt right away — what's wrong?

Central Vapors Team · Jun 27, 2026

AAlmost always it's an un-primed coil or too-high wattage. Before first use, prime it: put a few drops of e-liquid directly on the cotton wicking holes, fill the tank/pod, and let it sit 5–10 minutes so the cotton fully saturates. Start at the LOW end of the coil's wattage range and work up. Keep your e-liquid above the wicking ports so the coil never runs dry — dry hits are what scorch the cotton. — Central Vapors

QWhat resistances do PnP coils come in?

Central Vapors Team · Jun 27, 2026

AA wide range, from intense sub-ohm DTL builds (like the popular VM6 0.15Ω) up to higher-resistance MTL options — so you can match clouds or flavor and your preferred draw. — Central Vapors

QWhich devices use the original VOOPOO PnP coils?

Central Vapors Team · Jun 27, 2026

AThe original PnP plug-and-play coils fit the wide range of VOOPOO PnP devices — Drag X / Drag S, Drag Max, the Vinci series, and Argus, among others. Note: these are the original PnP coils, which differ from the newer PnP-X coils used by the Drag X2 / S2 and Argus Pro 2. — Central Vapors

Compatible Products

VOOPOO Vinci 3 Starter Kit VOOPOO Vinci Pod 15W Kit VOOPOO Vinci Royal Pod System VOOPOO UForce L-Tank

Customer Reviews & Ratings Hide Reviews Show Reviews

4/5 187 Reviews
Write a Review
  • super easy to load and last a LONG time

    Posted by gary on May 18th 2022

    I like the ease of use, price and fast delivery.

  • Recommend

    Posted by Valerie R. on May 11th 2022

    This product is much better than other's I have used. Doesn't leak & gives off really good flavor & vapor. Have been using for a few years.

  • Not sure

    Posted by Ron on May 5th 2022

    I amnot sure if there are better coils that are suggested that I use for my Drag S that is just what the vape store that is close to me said I could use maybe you have a better product that you might recommend because i use very low heat with the salts that I vape with so honestly I don't know if I am using the best possible product for complete satisfaction..!

  • Recommend

    Posted by Ronald H. on Apr 2nd 2022

    Works well and last about 2 weeks with frequent use. Vape 3mg tobacco flav.

  • PnP-VM3 Coil

    Posted by Leonardo on Mar 18th 2022

    Good taste and it don't burn as often as the PnP-VM1 Coil

  • Quick shipping and love the products

    Posted by Trudy Spears on Mar 14th 2022

    Everything went great. Received my order quickly and am a very happy customer

  • good product , great buy

    Posted by Ronnie Antonio Pierce on Mar 12th 2022

    This price is much better than i can find locally

  • Exactly what I wanted

    Posted by Angel Thornsberry on Mar 11th 2022

    Coils were perfect. Great product. Fast shipping.

  • don't know what happened

    Posted by GS on Mar 6th 2022

    Ordered 2 boxes of .8 ohm PnP VM5 coils for my Vinci Air's. None of them work in any of my 4 identical devices - getting "low resistance" on screen, and it will not fire. Confirmed with customer service that they were in fact the correct coils for my device, but nobody else has complained we don't know why they don't work. After going back and forth a few times and trying their suggestions, they offered to replace them. I emailed back saying okay but I would prefer a higher resistance coil under the circumstances such as a 1 ohm. Customer service emailed back saying "oh we've already sent you the same ones and I can't change it". I never authorized to them to send me the same coils again nor accepted that as a resolution to the problem. Pretty disappointing experience overall :/

  • Good coils

    Posted by Tosha Meadows on Mar 1st 2022

    Got to me quickly less than a week and seem to be good so far

Questions & Answers

Customers Also Bought

Best Sellers

!