VOOPOO Drag X2 80W Pod System
The Drag X2 takes a single 18650 and gives you 80W with it, which is a lot of output for something this narrow. Gene.TT 2.0 board, three modes, and the 5ml PnP X pod. Buy the cell separately and you can carry a spare instead of a charger.
Highlights
- 5-80W adjustable, resistance range 0.1ohm to 3.0ohm
- Runs on one external 18650 battery (sold separately)
- 5ml PnP X DTL pod, magnetic connection
- Three modes: SMART, RBA and ECO
- 129.8 x 31.8 x 28.6mm, USB Type-C charging
- Ships with a 0.15ohm and a 0.3ohm PnP-X coil
Drag X2 Specs
| Spec | Detail |
|---|---|
| Wattage | 5-80W, adjustable |
| Battery | 1 x 18650, external, not included |
| Charging | USB Type-C |
| Resistance range | 0.1ohm to 3.0ohm |
| Pod capacity | 5ml PnP X |
| Modes | SMART, RBA, ECO |
| Chipset | Gene.TT 2.0 |
| Airflow | Fixed |
| Size | 129.8 x 31.8 x 28.6mm |
| E-liquid | Freebase or nic salt, depending on the coil |
Coils and Pods That Fit
| Part | What you get | Notes |
|---|---|---|
| PnP-X coils | 0.15ohm to 1.0ohm, seven builds | Press-fit into the pod, no threading |
| PnP-X cartridge pods | Empty DTL or MTL pod, 5ml | Takes any PnP-X coil, coils sold separately |
| PnP-X Tank | Empty tank, 5ml, 510 threaded | MTL or DTL version, for 510 mods |
Which Resistance to Start With
| Coil | Wattage | Best For |
|---|---|---|
| 0.15ohm mesh | 60-80W | Direct lung, freebase |
| 0.2ohm mesh | 40-60W | Direct lung, freebase |
| 0.3ohm mesh | 32-40W | Direct lung to restricted direct lung |
| 0.45ohm | 25-32W | Restricted direct lung |
| 0.6ohm | 18-23W | Tighter draw, salt or freebase |
| 0.8ohm | 12-16W | Mouth to lung, nic salt |
| 1.0ohm MTL | 10-13W | Tightest draw, nic salt |
In the Box
- Drag X2 device
- PnP-X DTL pod, 5ml
- 1x 0.15ohm PnP-X mesh coil
- 1x 0.3ohm PnP-X mesh coil
- Type-C cable
- Battery not included
Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q |
Is a battery included?
No. It needs one 18650, sold separately in our 18650 battery section. If you would rather not deal with cells, the Drag S2 is the same platform with a 2500mAh internal battery.
|
| Q |
What is the difference between the Drag X2 and the Drag X3?
The Drag X3 adds a touchscreen and accepts a 21700 as well as an 18650. Both cap at 80W and both run the same PnP-X coils.
|
| Q |
Which coils fit?
PnP-X, 0.15ohm through 1.0ohm MTL. Not the older PnP coils - the deck changed between the two.
|
| Q |
Can I use nic salt?
Yes, with a 0.8ohm or 1.0ohm MTL coil at 10-16W. The two coils in the box are sub-ohm builds for freebase at higher wattage.
|
| Q |
Is the airflow adjustable?
Not on the device. Airflow is fixed here, so the coil you pick sets how tight or open the draw feels.
|
| Q |
How long does a charge last?
That depends on the 18650 you run and the wattage you sit at. ECO mode trims power to stretch the cell, and a spare 18650 is the fastest way back to full.
|
For use by adults 21+.
