Demon Killer Alien V2 Prebuilt RDA Coils | 7 Coil Styles, 10-Pack
This is Demon Killer's "Violence" lineup — seven exotic coil builds that used to need a jig, a drill, and a lot of patience, now pre-wrapped and ready to seat. Pick your style from the dropdown above; each pack holds 10 coils of that one build, made from Kanthal A1 and 316L stainless steel, with an Allen key tool included for tightening posts while you work.
Highlights
- 10 coils per pack, one build per order — choose the style above
- 7 builds available: Alien V2, Tsuka, Framed Clapton, Clapception, Tri-twisted Clapton, Spaced Clapton, and Staple Staggered Fused Clapton
- Kanthal A1 + 316L stainless steel construction — power (wattage) mode only, not built for temp control
- Includes an Allen key for your build deck's post screws
- Resistances run 0.25Ω to 0.35Ω depending on the style
The 7 Builds
| Coil Style | Resistance | Coils/Pack |
|---|---|---|
| Alien V2 | 0.25Ω | 10 |
| Tsuka Coil | 0.25Ω | 10 |
| Framed Clapton | 0.26Ω | 10 |
| Staple Staggered Fused Clapton | 0.30Ω | 10 |
| Clapception | 0.35Ω | 10 |
| Tri-twisted Clapton | 0.35Ω | 10 |
| Spaced Clapton | 0.35Ω | 10 |
What Makes Each Build Different
Alien V2 twists several core wires together before wrapping them in a spiral, the same idea behind the classic Alien coil — more surface area than a plain wire, built for flavor. Tsuka Coil runs the same idea with a flat ribbon wire wrapped around multiple core strands instead of round wire, so it sits a little differently against the wick.
Framed Clapton sandwiches a stacked ribbon-wire core between two round support wires, then wraps the whole thing in a thinner wire — that "frame" adds rigidity and extra texture. Clapception takes it further: a full clapton coil (core wire plus wrap) becomes the core of a second wrap, essentially a clapton wound around a clapton. Staple Staggered Fused Clapton starts as a fused clapton — two core wires side by side — then staggers the outer wraps so they sit evenly spaced rather than tight together, which opens up more surface contact with your wick.
Tri-twisted Clapton twists three core wires together before wrapping, one step past a standard fused clapton's two. Spaced Clapton is the most straightforward of the seven — a single core wire wrapped with visible gaps between wraps instead of a tight coil, which makes it easier to wick evenly and a reasonable starting point if you're new to prebuilt exotic coils.
One thing worth knowing before you build: Kanthal wire is for power (wattage) mode only — it doesn't work in temperature control. If your mod runs TC and you switch to one of these, stay in power mode.
Why Shop Demon Killer Coils at Central Vapors
We've stocked Demon Killer build supplies since our early days selling rebuildable gear, and this Violence lineup is one of the more requested exotic-coil picks in that catalog. Central Vapors has been shipping vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q | Do I get all 7 styles in one order? No. Each order is one style, 10 coils, at the resistance shown in the dropdown. Change the selection to order a different build. |
| Q | Are these coils pre-wicked? No. They're pre-wrapped wire only — you still seat them on your build deck, pulse and trim the legs, and wick with cotton yourself. |
| Q | Will these work in temperature control mode? No. Kanthal wire only fires correctly in power (wattage) mode. Stick to wattage mode with any of these seven builds. |
| Q | What's included with the coils? Each 10-pack ships with an Allen key sized for tightening most RDA/RTA build deck post screws. |
For use by adults 21+.
