Wotofo NexMesh Prebuilt Coils | Triple-Density Mesh for the Profile Series
NexMesh is Wotofo's mesh-sheet coil built specifically for the Profile family of RDAs and RTAs. The triple-density weave packs more mesh into the same footprint as Wotofo's standard mesh, which is what drives the faster ramp-up and tighter flavor these are known for. Two builds are available here — a pure mesh sheet (Extreme) and a clapton-wrapped mesh hybrid (Clapton).
Highlights
- 2 builds: Nexmesh Extreme (0.16Ω, 10pcs/pack) or NexMesh Clapton (0.2Ω, 5pcs/pack)
- Triple-density mesh weave — smaller holes than standard mesh for a faster ramp-up and less spitback
- Built for the Wotofo Profile deck family, not a universal mesh coil
- Runs roughly 60-80W on either build; start low and work up to taste
The 2 Builds
| Build | Material | Resistance | Pack Size |
|---|---|---|---|
| Nexmesh Extreme | Kanthal A1 | 0.16Ω | 10 coils |
| NexMesh Clapton | Ni80 + Kanthal A1 | 0.2Ω | 5 coils |
Both are estimated to run around 60-80W. Extreme is a straight mesh sheet — the simpler, more consistent option. Clapton wraps a clapton wire in with the mesh for a denser build with more surface contact.
Deck Compatibility
NexMesh fits the current Wotofo Profile deck family: Profile RDA, Profile Unity RTA, Profile PS, Profile M RTA, Profile 1.5 RDA/RDTA, and Profile X RTA.
One thing to check before you order: NexMesh's mesh sheet is roughly 1.4x the surface area of the mesh that shipped with the very first Profile RDA release. If you're still running that original deck, this mesh won't drop in as a direct swap — it was built for the current Profile 1.5-generation deck geometry.
Why Shop Wotofo Coils at Central Vapors
Wotofo's Profile line is one of the more requested RDA platforms among our rebuildable-atomizer customers, and we keep both NexMesh builds in stock for that reason. Central Vapors has been filling vape orders since 2013, backed by our satisfaction guarantee.
Common Questions
| Q | Which build should I pick, Extreme or Clapton? Extreme is the simpler mesh sheet and a solid default. Clapton adds a wrapped wire into the mesh for extra density if you want a slightly different heat and flavor character. |
| Q | Will this fit my original Profile RDA? Not the very first Profile RDA release — NexMesh's larger mesh sheet was built for the current Profile 1.5-generation deck. It fits Profile RDA, Profile Unity RTA, Profile PS, Profile M RTA, Profile 1.5 RDA/RDTA, and Profile X RTA. |
| Q | Do these come pre-wicked? No. Mesh coils still need cotton (or the manufacturer's recommended wick) fed through the mesh and seated before you fire it. |
| Q | What wattage should I run these at? Roughly 60-80W for either build. Start near the low end, pulse-check for hot spots, and work up from there. |
For use by adults 21+.
