Skip to main content

WARNING: This product contains nicotine. Nicotine is an addictive chemical.

CALL US ON 469-828-7307

VOOPOO

In stock

VOOPOO PnP Replacement Coils

4 (187 reviews) Write a Review
$12.45

ShippingFREE $95+ · ½-price $50+ · else $9.99DeliveryShips within 48 hrs (order by 12pm CT, Mon–Fri) · arrives in 2–7 business days. Shipping details


Adding to cart… The item has been added

Key Specs

Fits Devices UForce L-Tank, Vinci 3 Kit, Drag X 80W Kit, Drag S 60W Kit, Argus Pro Kit, Argus GT 2 200W Kit, Drag H40 Kit, Drag E60 Kit + 5 more
Resistance Options 0.15Ω, 0.2Ω, 0.3Ω, 0.45Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω
Wattage Range 10-80W
Draw Style MTL & DTL
Coil Type Mesh
Pack Size Single Coil, 5-Pack

VOOPOO PnP Replacement Coils

Genuine VOOPOO PnP coils in 17 core types, from a 0.15Ω mesh built for heavy cloud production down to a 1.2Ω MTL coil built for a tight, cigarette-like draw. Match the coil to your device's wattage range and how you actually vape — the full breakdown is below.

Before you order: check your device can actually reach the coil's rated wattage. A coil run below its minimum wattage delivers weak vapor and a burnt taste no matter how new it is.

Coil Options

CoreTypeResistanceWattage RangeStyle
VM6 Mesh 0.15Ω 60-80W DL
TW15 Mesh 0.15Ω 55-70W DL
VM5 Mesh 0.2Ω 40-60W DL
TW20 Mesh 0.2Ω 40-55W DL
VM1 Mesh 0.3Ω 32-40W DL
TW30 Mesh 0.3Ω 28-36W DL/RTL
VM3 Mesh 0.45Ω 25-35W DL
VM4 Mesh 0.6Ω check tank manual Half DL
TM1 Regular 0.6Ω 20-25W Half DL
DW60 Regular 0.6Ω 18-23W RDL
TM2 Regular 0.8Ω 12-18W Half DL
R1 Regular 0.8Ω 12-18W MTL
DW80 Regular 0.8Ω 12-16W MTL
R2 Regular 1.0Ω 10-15W MTL
TR1 Regular 1.2Ω 10-15W MTL
VM2 Regular 1.2Ω check tank manual MTL
RBA Rebuildable 0.25–2.0Ω build your own —

Compatible With

VOOPOO Drag X • Drag S • Drag 4 • Drag Max • Drag H40 • Drag H80S Kit • Drag E60 Kit • Drag Baby Trio • Vinci • Vinci R • Vinci X • Vinci X2 • Vinci 2 • Vinci 3 Kit • Argus 40W • Argus Air • Argus Pro 80W • UForce-L Tank • V.SUIT • PnP Pod Tank • Navi

FAQ

Q
What's the difference between Mesh and Regular coils?
Mesh coils (the VM and TW series) heat more evenly across a wider surface, which usually means brighter flavor and a faster ramp-up. Regular coils use a classic wire-wrapped build and tend to run at lower wattage.
Q
How do I know if I want DL or MTL?
DL (direct lung) is a big, airy draw straight to the lungs, like pulling through a straw — that's the sub-0.5Ω coils at higher wattage. MTL (mouth to lung) is a tighter draw you hold in your mouth first, closer to a cigarette — that's 0.8Ω and up at lower wattage.
Q
Do I need to prime a new coil before using it?
Yes. Apply a few drops of e-liquid directly to the exposed wicking holes and let it sit 5-10 minutes before your first vape, so the cotton fully saturates. Firing a dry coil can scorch the wick immediately.

Sold as a 5-pack. For use by adults 21+.

Questions & Answers

QWhy are there several coil options for the same tank, and how do I pick the right one?

Central Vapors Team · Jun 27, 2026

AThey're the same coil family in different resistances (ohms), each tuned for a different style — they all fit the same tank/pod. Lower-ohm coils (about 0.2–0.4Ω) are sub-ohm: run them at higher wattage for warm, big direct-lung clouds. Higher-ohm coils (about 0.8–1.2Ω and up) run at lower wattage for a tighter mouth-to-lung draw, cooler vapor, and longer battery life. So pick the resistance that matches the wattage and draw you like, and stay within each coil's recommended wattage range for the best flavor and coil life. Tip: confirm you're buying the exact coil family your device lists — coil names can differ between device generations. — Central Vapors

QHow do I prime a new coil or pod before I use it?

Central Vapors Team · Jun 27, 2026

ASaturate the wick first: add 3–5 drops of e-liquid onto the exposed cotton holes on the coil, install it, fill the tank/pod, then wait 5–10 minutes before your first puff. A few gentle primer puffs (device off, or at low power) help pull liquid into the wick. Always refill before it runs low. This is the #1 way to avoid a burnt taste. — Central Vapors

QMy new coil tastes burnt right away — what's wrong?

Central Vapors Team · Jun 27, 2026

AAlmost always it's an un-primed coil or too-high wattage. Before first use, prime it: put a few drops of e-liquid directly on the cotton wicking holes, fill the tank/pod, and let it sit 5–10 minutes so the cotton fully saturates. Start at the LOW end of the coil's wattage range and work up. Keep your e-liquid above the wicking ports so the coil never runs dry — dry hits are what scorch the cotton. — Central Vapors

QWhat resistances do PnP coils come in?

Central Vapors Team · Jun 27, 2026

AA wide range, from intense sub-ohm DTL builds (like the popular VM6 0.15Ω) up to higher-resistance MTL options — so you can match clouds or flavor and your preferred draw. — Central Vapors

QWhich devices use the original VOOPOO PnP coils?

Central Vapors Team · Jun 27, 2026

AThe original PnP plug-and-play coils fit the wide range of VOOPOO PnP devices — Drag X / Drag S, Drag Max, the Vinci series, and Argus, among others. Note: these are the original PnP coils, which differ from the newer PnP-X coils used by the Drag X2 / S2 and Argus Pro 2. — Central Vapors

Customer Reviews & Ratings Hide Reviews Show Reviews

4/5 187 Reviews
Write a Review
  • Thanks

    Posted by Kim Gribner on Feb 5th 2021

    the past few time I've purchased these coils I've only been able to get 4 out of the pack of 5, which meant every time they fulfilled my order they had to rip just a single one off every time and I know its probably getting tiring to deal with lol why not just buy all 5 right. well I'm writing this review to specifically say thank you to Nate (I think is the name?) for putting up with that on my past orders. it's not much but thanks for working with me and my temporary budget lol. and of course the coils are just what you expect so nothing bad to write there :)

  • Awesome product

    Posted by Melissa Maestas on Feb 2nd 2021

    Just the coils I needed..

  • Wrong ones

    Posted by Sean Johnson on Jan 30th 2021

    Ordered the .2 mesh coils, waited 2 weeks after it was "shipped" even with express shipping just to get the .15 ohm that leak. Sadly disappointed considering I order from here all the time.

  • VooPoo Vinci Coil

    Posted by JD on Jan 29th 2021

    Perfect, exactly what I needed.

  • Not authentic coils

    Posted by Jamie on Jan 19th 2021

    Just like everyone else has reviewed, these coils are not authentic. Half of them did not fit and the other half had a bad burnt flavor. Centralvapors did send me another pack which I had better luck with, but I would not order the VM1's again. I just ordered a pack of VM6 so hopefully these will be real.

  • Not compatible

    Posted by Don Gainer on Jan 7th 2021

    Put the new coil in and it immediately tasted funny lasted one day and had to replace it

  • Love it

    Posted by Valerie Reesor on Dec 30th 2020

    I've used several different coils for different vapes & this is one of the best & easiest to care for.

  • So angry

    Posted by Tammy Zabler on Dec 21st 2020

    I ordered these coils all the time I've never ordered from this company Central Vapors, but the price was good so I ordered three boxes of replacement coils they came in and decent amount of time I have already gone through all 15 coils in a little less than a week probably because none of them fit right I've had maybe three of them that actually fit the other ones you push into the tank and they pop right back out and the three that I did have actually fit didn't sit right and then within I'd say half a day of not constant vaping vaping for maybe an hour a day totally burnt burning my throat worst coil experience I've ever had I don't know if they repurpose their coils or if they I don't know but they were horrible I will never order from this company again. I've never had this trouble ordering coils from any other company as I'm reading other reviews I see I'm not the only one that's had this issue with this company.

  • Doesn't Fit

    Posted by Lee C. on Dec 12th 2020

    My Voopoo came with two coils, one of which being the PnP-VM1. I really liked it and ordered a pack of replacements. Unfortunately none of them will fully seat in the pod. I tried all 5. I was able to get them to fit by removing the red rubber gasket inside the coil but the chemical taste it produces is nauseating. I'm hoping this was just an issue with the production run mine came from.

  • Careful with your choice...

    Posted by Richard McCord on Nov 17th 2020

    I grabbed the VM1 coils not realizing they wouldn't work with the Voopoo Argus. Make sure the Resistance is compatible with your device. You need to scroll down on the product page for details on each Coil.

Questions & Answers

Customers Also Bought

Best Sellers