VOOPOO Argus G2 Mini Pod System Kit
The G2 Mini is the small, cheap end of the 2024 Argus pod family, and it gives up less than the price suggests: 1200mAh, the full 5-30W output range, and the 3ml top-fill cartridge the bigger G2 uses. It is 13.4mm thick and 115mm tall in an aluminium alloy and PC shell. The airflow slider covers tight MTL through restricted direct lung, and there is no screen to read, just a bottom LED for battery level.
- 5-30W, resistance range 0.4ohm to 3.0ohm
- 1200mAh internal battery, Type-C 5V/1A charging
- 3ml Argus Top Fill Cartridge V2, refills without leaving the device
- Airflow slider: tight MTL, loose MTL, or RDL
- 115 x 25.6 x 13.4mm, aluminium alloy and PC
- Bottom LED battery indicator, white above 15% and red below, and it can be switched off
- GENE.AI chip, draw activated, magnetic pod connection
Argus G2 Mini Specs
| Spec | Detail |
|---|---|
| Wattage | 5-30W |
| Battery | 1200mAh internal, non-removable |
| Charging | USB Type-C, 5V/1A |
| Voltage | 3.2-4.2V |
| Resistance range | 0.4ohm to 3.0ohm |
| Pod capacity | 3ml, top fill, PCTG |
| Size | 115 x 25.6 x 13.4mm |
| Body | Aluminium alloy and PC, magnetic pod connection |
| Airflow | Adjustable slider, tight MTL through RDL |
| Indicator | Bottom LED, white above 15% and red below |
| Operation | Draw activated |
| Chipset | GENE.AI |
Pods That Fit
| Pod | Resistances | Fill | Notes |
|---|---|---|---|
| Argus Top Fill V2 Pods | 0.4ohm, 0.7ohm, 1.0ohm | Top fill, 3ml | The pod VOOPOO lists for this device. Sold as a 3-pack, one resistance per pack |
All three resistances are inside the device's 0.4-3.0ohm range, so any of them will run here. The same pod fits the Argus G2, which is the reason to buy into this platform rather than a closed system.
Which Resistance to Start With
| Resistance | Wattage | Best For |
|---|---|---|
| 0.4ohm | 18-30W | Restricted direct lung, freebase e-liquid |
| 0.7ohm | 14-18W | Looser mouth-to-lung, salt or freebase. This is the pod in the box |
| 1.0ohm | 10-14W | Tighter mouth-to-lung, nic salt |
In the Box
- Argus G2 Mini device
- 1x 0.7ohm Argus Top Fill Cartridge V2, 3ml
- User manual
No Type-C cable is included with this kit, so use one you already have.
Why Shop VOOPOO at Central Vapors
One pod in the box will not last long, so the thing that matters is whether the refills are actually on a shelf. We stock all three Argus Top Fill V2 resistances, and they fit the larger G2 as well, so a reorder is one page and not a compatibility hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q |
Which pods fit the Argus G2 Mini?
The 3ml Argus Top Fill V2 pod in 0.4ohm, 0.7ohm, or 1.0ohm. That is the pod VOOPOO lists for this device, and the kit ships with the 0.7ohm.
|
| Q |
G2 Mini or the full-size G2?
Same 5-30W output and the same pods. The G2 adds a 0.96-inch colour screen, three power modes, and 2A charging, but carries a 1000mAh battery. The Mini has no screen and a bigger 1200mAh cell. Pick the Mini for size and runtime, the G2 for control.
|
| Q |
How do I know the battery level with no screen?
The LED in the base reads white above 15% and red below it. Vape three times quickly to change the light or turn it off.
|
| Q |
How do I refill it?
Open the stopper on top of the pod and fill from there. The pod stays seated in the device, which is the main change from the older side-fill Argus cartridges.
|
| Q |
Which resistance for nic salt?
The 1.0ohm at 10-14W is the tightest draw of the three and the usual pick for salt. The 0.7ohm in the box works too if you want it a little looser.
|
| Q |
Does the airflow slider make a real difference?
Yes, it is the main way you change the feel of the draw. Closed for a tight mouth-to-lung, mid for a looser one, open for restricted direct lung with the 0.4ohm pod.
|
For use by adults 21+.
