VOOPOO Argus G 25W Pod System
The Argus G is the bar-shaped middle of the Argus pod line. A 1000mAh battery, 5-25W adjustable output, and a 2ml cartridge with the coil built in, in a body 13.5mm thick. There is an airflow switch on the side for mouth-to-lung or restricted lung, a display screen, and a single firing button that also drives the wattage adjustment. It shares its cartridge platform with the rest of the Argus family, so spares carry over in both directions.
- 5-25W adjustable, resistance range 0.5ohm to 3.0ohm
- 1000mAh internal battery, Type-C charging
- 110.9 x 25.7 x 13.5mm zinc alloy body
- 2ml PCTG cartridge, side fill, integrated coil
- Airflow adjustment switch for MTL or RDL
- Draw activated, with a display screen and magnetic cartridge connection
- Ships with two cartridges, a 0.7ohm and a 1.2ohm
Argus G 25W Specs
| Spec | Detail |
|---|---|
| Wattage | 5-25W, adjustable |
| Battery | 1000mAh internal, non-removable |
| Charging | USB Type-C |
| Voltage | 3.2-4.2V |
| Resistance range | 0.5ohm to 3.0ohm |
| Cartridge capacity | 2ml, side fill, PCTG |
| Coil | Integrated, replaced with the whole cartridge |
| Size | 110.9 x 25.7 x 13.5mm |
| Airflow | Adjustment switch, MTL through RDL |
| Operation | Draw activated, single button for wattage |
| Body | Zinc alloy, magnetic cartridge connection |
| Protection | 5s overtime, short circuit, overcharge, low battery, over-current |
Pods That Fit
| Pod | Resistances | Fill | Notes |
|---|---|---|---|
| Argus POD Cartridge | 0.7ohm, 1.2ohm | Side fill, 2ml | The two cartridges the kit ships with |
| Argus Top Fill V2 Pods | 0.7ohm, 1.0ohm | Top fill, 3ml | Newer family pod, sold as a 3-pack. Fills without leaving the device |
The Top Fill V2 pack also includes a 0.4ohm, which VOOPOO rates for 18-30W. That resistance is not on VOOPOO's compatibility list for the Argus G and this device caps at 25W, so use the 0.7ohm or 1.0ohm here. The same cartridges run in the Argus G2.
Which Resistance to Start With
| Resistance | Draw | Best For |
|---|---|---|
| 0.7ohm | Looser mouth-to-lung, or RDL with the airflow open | Freebase e-liquid, or lower-strength salt |
| 1.0ohm | Tight mouth-to-lung | Nic salt, on the Top Fill V2 pod |
| 1.2ohm | Tightest draw in the range | Nic salt at 25-50mg, on the Argus POD cartridge |
In the Box
- Argus G device
- 1x 0.7ohm Argus POD cartridge
- 1x 1.2ohm Argus POD cartridge
- Type-C cable
- Lanyard
- User manual
Why Shop VOOPOO at Central Vapors
Two cartridges in the box means you can try both draws before buying spares, and we stock all three Argus Top Fill V2 resistances for when you do. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q |
Which pods fit the Argus G?
The 2ml side-fill Argus POD cartridge in 0.7ohm or 1.2ohm, which is what ships in the kit, and the 3ml Argus Top Fill V2 pod in 0.7ohm or 1.0ohm. Both are on VOOPOO's compatibility list for this device.
|
| Q |
Argus G or Argus Pod 20W?
The G adds 5W of headroom and a 1000mAh battery instead of 800mAh, in a slimmer bar-shaped body. Same cartridge platform, so switching does not strand spares you already own.
|
| Q |
Which resistance for nic salt?
The 1.2ohm Argus POD cartridge with the airflow switch closed down, or the 1.0ohm Top Fill V2. Both give a tight, quiet draw that suits 25-50mg salt at the low end of the wattage range.
|
| Q |
What does the airflow switch actually change?
How much air comes in around the coil. Closed down it is a tight mouth-to-lung draw. Opened up it loosens toward restricted direct lung, which pairs better with the 0.7ohm cartridge.
|
| Q |
Can I replace just the coil?
No, the coil is integrated. When the flavor fades you replace the cartridge, which is why the kit ships with two.
|
| Q |
What if I want more power later?
The Argus G2 runs to 30W on the same top-fill pods and adds a colour screen. Past that, the Argus Pro 2 is an 80W pod mod on VOOPOO's PnP coils.
|
For use by adults 21+.
