|
WARNING: This product contains nicotine. Nicotine is an addictive chemical. |
Loading... Please wait...
The new Vision Spinner 2 clone is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look. Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back!
If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try. Its the perfect 510 battery now with an extended battery life and comes in the color of your choice.
The Vision Spinner 2 also comes fully equipped with its own convenient built in battery meter charge indicator. When fully charged the button illuminates white, at half charge the color changes to blue and below a 30% charge it turns orange indicating low battery and a recharge is soon required.
The Vision Spinner 2 Variable Voltage battery has four distinct safety features:
Short Circuit Protection: In case of a short circuit, the battery will automatically shut down. It will turn on again once the current is back to normal.
Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again.
Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
Over-Discharge Protection: The Spinner battery will automatically turn off upon discharge to prevent it from overly depleting the power. The LED light will flash 5 times to remind you to charge your battery.
The Vision Spinner also has a 5-click on/off safety feature that prevents accidental activation when your ecig is stored in your pocket or purse.
Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster. It is highly recommended that you start at 3.3 volts and increase the settings gradually until the vapor hits your sweet spot.
Features:
•Spin Dial for adjusting Voltage
•Upgraded PBC and battery cell increasing lifespan
•Operating Voltage: (Output 3.3-4.8V)
•Charging Voltage: (Input 4.2V / 420mA)
•Vision Spinner Clone

Previous | Showing reviews 105-112 of 300 | Next
Posted by Kevin Keller on Sep 26th 2020
Do not buy this product. The battery lasts maybe an hour at best. Look at the other reviews, they say the same thing.
Posted by Christine Simpkins on Sep 22nd 2020
Great selection ....made buying fast and easy.
Received product very fast!
Posted by DeaAnna Dille on Sep 5th 2020
My charge only lasted an hour and I paid more. I have had other spinner II for less money. This is very lightweight compared to my old spinners.
Posted by molly on Aug 27th 2020
so far so good.
Posted by Sue Locknane on Aug 19th 2020
I have been buying the Vision Spinner battery for a very long time. These last two I bought are half the quality of the previous ones I own, they don't hold a charge any where as near as the previous and the price still goes up?
Posted by Unknown on Aug 15th 2020
While the customer service is exceptional the knock off vision spinners are unreliable.
Posted by Gil Rary on Aug 10th 2020
I purchased 2 spinner II batteries. Both batteries started out good, they charged up fine after I received them.
After a week of use, both batteries started to get hot in my hand while using them. This happened within a day of each other, BOTH Batteries. After this happened, both batteries became unusable.
Posted by Candace Tate on Aug 8th 2020
I ordered two. First on stuck "on and burned out.
Got real hot in my hand. out