Vision Spinner II (1600 mAh)

Price: $14.79

282 product reviews

* Color:

Add Charger:

Quantity:

Product Description

Vision Spinner 2

The new Vision Spinner 2 clone is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look. Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back!

If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try. Its the perfect 510 battery now with an extended battery life and comes in the color of your choice.

The Vision Spinner 2 also comes fully equipped with its own convenient built in battery meter charge indicator. When fully charged the button illuminates white, at half charge the color changes to blue and below a 30% charge it turns orange indicating low battery and a recharge is soon required.

The Vision Spinner 2 Variable Voltage battery has four distinct safety features:

Short Circuit Protection: In case of a short circuit, the battery will automatically shut down. It will turn on again once the current is back to normal.
Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again.
Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
Over-Discharge Protection: The Spinner battery will automatically turn off upon discharge to prevent it from overly depleting the power. The LED light will flash 5 times to remind you to charge your battery.
The Vision Spinner also has a 5-click on/off safety feature that prevents accidental activation when your ecig is stored in your pocket or purse.

Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster. It is highly recommended that you start at 3.3 volts and increase the settings gradually until the vapor hits your sweet spot.

Features:

•Spin Dial for adjusting Voltage
•Upgraded PBC and battery cell increasing lifespan
•Operating Voltage: (Output 3.3-4.8V)
•Charging Voltage: (Input 4.2V / 420mA)
•Vision Spinner Clone

Product Reviews

Write Review

Showing reviews 1-5 of 282 | Next

very weak battery

Posted by William Gilligan on Oct 1st 2022

I charge the battery for 6 hours & I'm lucky if it lasts for 45 minute s the worse I've ever had
Old things made new

Posted by Kega Nasios on Sep 21st 2022

Sometimes the old was better. These batteries work well, but do not hold a charge very well. Used to last all day, now only an hour or two. Still, they're hard to find and I appreciate Central Vapors keeping them available for us old time users!
Battery Function

Posted by Ken Wollenberg on Sep 16th 2022

This battery does not function with E Go C Cartomizer as the pin is too short to make proper connection. The Vision Spinner earlier model was a perfect replacement Additionally, The charge Color sequence on the purchased batteries White (Charged) Blue (Mid Charged) is old not a newer Vision II color scheme as it is advertised. White, Blue Orange/Red is the upgraded.
Very short charged time

Posted by Kathy on Sep 13th 2022

This device won't stay charged for 10 minutes.....
Spinner II ok

Posted by Faleice on Sep 10th 2022

Not as good as the original. Threads tend to give out more easily and don’t hold charge as long. But they are better than the alternative.