RXELF XMate & XROS Replacement Pods | 0.6Ω and 0.8Ω
An aftermarket refillable pod built for the RXELF XMate C and made to cross over to the Vaporesso XROS platform. Integrated mesh coil, 2 mL, sold in a 2-pack in either 0.6Ω or 0.8Ω.
Highlights
- Two resistances: 0.6Ω and 0.8Ω, both integrated mesh
- Refillable — the mouthpiece lifts off to reach the fill port
- Fits the RXELF XMate C and the Vaporesso XROS pod platform
- Sold as a 2-pack
- Aftermarket, not a Vaporesso-branded pod
The two resistances
| Resistance | Draw | Best with |
|---|---|---|
| 0.6Ω | Looser, warmer, restricted direct-lung | Regular-strength freebase juice |
| 0.8Ω | Tighter mouth-to-lung, cooler, easier on battery | Nicotine salts |
XROS-platform devices read the pod and set their own power, so there is no wattage to dial in. If you are coming off cigarettes and running salts, take the 0.8Ω. If you want a warmer, airier pull on regular juice, take the 0.6Ω.
Which devices these fit
The RXELF XMate C kit, and the Vaporesso XROS pod platform — XROS, XROS 2, XROS 3, XROS Mini, XROS 3 Mini, XROS Cube and the rest of the family. The XROS pod is one of the most widely shared shapes in pod vaping, which is why aftermarket versions like this one exist.
These are RXELF pods, not Vaporesso pods. That is the point — they cost less per pod. If you specifically want first-party pods, buy the Vaporesso ones instead; nothing here is a substitute for a warranty claim on the device.
How to fill one
Pop the mouthpiece off the top of the pod — push firmly on the flat side with a thumb until it releases. Underneath you will see two openings: a wide central one and a smaller one sealed with a coloured silicone plug. The silicone-plugged hole is the fill port. The centre hole is airflow, and juice down there is what makes a pod gurgle and spit.
Lift the plug, run the bottle nozzle into the port, and fill slowly so air can escape. Reseat the plug, click the mouthpiece back on, then let a brand-new pod stand five to ten minutes before the first puff so the mesh wicks through. Skipping that wait is the single most common way people burn a pod on day one.
Why buy these from Central Vapors
We keep both resistances on the shelf and we are straight about what this is: a cheaper aftermarket pod for a very common platform. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
XMate & XROS pods — common questions
| Q |
Will these fit my Vaporesso XROS 3? Yes. They are built to the XROS pod shape and fit across the XROS 3 and the wider XROS family, as well as the RXELF XMate C. |
| Q |
Is this a genuine Vaporesso pod? No. It is an RXELF aftermarket pod made to fit the XROS platform and the RXELF XMate C. We list it as aftermarket on purpose so nobody is surprised at the door. |
| Q |
How do I refill them? Take the mouthpiece off the top of the pod, lift the small silicone plug next to the central airflow hole, and fill through that port. Reseal the plug and snap the mouthpiece back on until it clicks. |
| Q |
Which resistance should I choose? 0.8Ω for a tighter mouth-to-lung draw and nicotine salts; 0.6Ω for a warmer, looser pull on regular-strength juice. Those two are the whole range here — there is no 1.0Ω or 1.2Ω version of this pod. |
| Q |
How long does a pod last? One to three weeks for most people. Dark, heavily sweetened juice shortens it a lot. Muted flavor or a burnt edge that a fresh fill does not fix means it is spent. |
For use by adults 21+.
