VOOPOO Drag 6 Kit with UFORCE X II Tank
The Drag 6 is the big one in the current Drag line: 220W from a 4400mAh internal battery, GENE TT 3.0 board, and a control wheel instead of up-down buttons for wattage. It comes paired with the UFORCE X II tank, a 5ml top-fill tank that runs the same PnP X coils as the rest of the family. Capacitive touch unlock keeps it from firing in a pocket.
- Up to 220W, GENE TT 3.0 chipset
- 4400mAh internal battery, Type-C fast charging
- Modes: SMART, RBA and TC-TRC temperature control
- UFORCE X II tank, 5ml, dual top fill with a quarter-turn lock
- Precision control wheel for wattage, 1.66in TFT display
- Ships with a 0.15ohm and a 0.3ohm PnP X coil plus a spare glass
Drag 6 Specs
| Spec | Detail |
|---|---|
| Wattage | Up to 220W |
| Battery | 4400mAh internal, non-removable |
| Charging | USB Type-C, fast charge |
| Modes | SMART, RBA, TC-TRC |
| Tank | UFORCE X II, 5ml, dual top fill, quarter-turn lock |
| Coil platform | PnP X, press fit |
| Display | 1.66in TFT |
| Controls | Precision wattage wheel, capacitive touch unlock |
| Connection | 510 threaded tank |
Coils and Pods That Fit
| Part | What you get | Notes |
|---|---|---|
| PnP-X coils | 0.15ohm to 1.0ohm, seven builds | Press-fit into the pod, no threading |
| PnP-X cartridge pods | Empty DTL or MTL pod, 5ml | Takes any PnP-X coil, coils sold separately |
| PnP-X Tank | Empty tank, 5ml, 510 threaded | MTL or DTL version, for 510 mods |
Which Resistance to Start With
| Coil | Wattage | Best For |
|---|---|---|
| 0.15ohm mesh | 60-80W | Direct lung, freebase |
| 0.2ohm mesh | 40-60W | Direct lung, freebase |
| 0.3ohm mesh | 32-40W | Direct lung to restricted direct lung |
| 0.45ohm | 25-32W | Restricted direct lung |
| 0.6ohm | 18-23W | Tighter draw, salt or freebase |
| 0.8ohm | 12-16W | Mouth to lung, nic salt |
| 1.0ohm MTL | 10-13W | Tightest draw, nic salt |
The 220W figure is the mod ceiling, not a coil rating. PnP X coils top out at 80W on the 0.15ohm build, so stay inside the range printed on the coil. The headroom is there for RBA decks and other 510 tanks.
In the Box
- Drag 6 mod
- UFORCE X II tank, 5ml
- 1x 0.15ohm PnP X coil
- 1x 0.3ohm PnP X coil
- Spare glass
- Parts bag
- Type-C cable
Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q |
Do I need batteries for the Drag 6?
No. The 4400mAh pack is internal and charges over Type-C. Nothing to buy, nothing to swap.
|
| Q |
Can it really run 220W?
The mod can. The coils in the box cannot - PnP X tops out at 80W on the 0.15ohm build. Treat the 220W as headroom for an RBA deck or another 510 tank.
|
| Q |
Which coils does the UFORCE X II take?
PnP X, the same seven resistances used across the Drag X2, S2 and X3. They press-fit; there is no threading to line up.
|
| Q |
How does it fill?
Dual top fill. Quarter-turn the top cap to unlock, pour, close it. The tank stays on the mod.
|
| Q |
What is TC-TRC mode?
Temperature control for nickel, titanium or stainless builds, with TRC as VOOPOO's own curve setting. Mesh coils in the box run in wattage mode, not TC.
|
| Q |
Is a spare glass included?
Yes, one spare 5ml glass ships in the kit along with the parts bag of seals.
|
For use by adults 21+.
