|
WARNING: This product contains nicotine. Nicotine is an addictive chemical. |
Loading... Please wait...
The new Vision Spinner 2 clone is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look. Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back!
If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try. Its the perfect 510 battery now with an extended battery life and comes in the color of your choice.
The Vision Spinner 2 also comes fully equipped with its own convenient built in battery meter charge indicator. When fully charged the button illuminates white, at half charge the color changes to blue and below a 30% charge it turns orange indicating low battery and a recharge is soon required.
The Vision Spinner 2 Variable Voltage battery has four distinct safety features:
Short Circuit Protection: In case of a short circuit, the battery will automatically shut down. It will turn on again once the current is back to normal.
Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again.
Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
Over-Discharge Protection: The Spinner battery will automatically turn off upon discharge to prevent it from overly depleting the power. The LED light will flash 5 times to remind you to charge your battery.
The Vision Spinner also has a 5-click on/off safety feature that prevents accidental activation when your ecig is stored in your pocket or purse.
Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster. It is highly recommended that you start at 3.3 volts and increase the settings gradually until the vapor hits your sweet spot.
Features:
•Spin Dial for adjusting Voltage
•Upgraded PBC and battery cell increasing lifespan
•Operating Voltage: (Output 3.3-4.8V)
•Charging Voltage: (Input 4.2V / 420mA)
•Vision Spinner Clone

Previous | Showing reviews 49-56 of 300 | Next
Posted by Peter Tyler on Jan 11th 2022
I am currently waiting for a satisfactory conclusion regarding the fact that these batteries are not holding a charge for more than 30 minutes before they are totally discharged. Other Spinner batteries I have purchased from other companies are still going strong after a year and hold their charge for up to 12 hours. I have explained the problem but your customer service department don't seem to grasp the problem and have offered no solution to the problem to date.
Posted by Mrs. Irritated on Jan 8th 2022
I bought 4 of these things because an authentic vision spinner is hard to come by. This is made out of cheap no-name batteries that take 8 hours to recharge but it runs out of juice after 15 minutes. Don't waste your money. I wasn't going to make a review but today as I'm using this thing died on me and it was left recharging all night, I used it for about 10 minutes.
Posted by Grace Coleman on Jan 5th 2022
Not happy with my purchase, these batteries are knock offs and not the "original". The original Spinner battery is heavier and can hold a charge for a least a day and a half. These are much lighter and hold about half a days charge.
Posted by Scott Hunziker on Jan 2nd 2022
This is my first Vision Spinner II (1600mah) purchase and I am very happy with the performance and the battery life. I am only using the 3.8 volt setting and it really does a great job at that setting. I have ordered 8 of these to keep on hand. Thank you for making a product that I can depend on and use with pleasure.
Posted by KATHLEEN W. on Nov 3rd 2021
I have always bought the Vision Spinner II for 5 years now and this is the first time I think we received a product that is of: poor quality possible counterfeit. Will not be buying anything else from here.
Posted by sandy sowada on Nov 3rd 2021
So far so good with this vision spinner ll! I ordered 2 vision spinner 3's and after screwing the aspire tank on they both still moved like "bobble heads!" Has movement which shouldn't be there! I'll stick to the Vision ll's Thank You :-)
Posted by Unknown on Oct 20th 2021
It does not work, a waste of money
Posted by Unknown on Oct 17th 2021
The bottom twisting part was lopsided when I got it, so when I would set it down it would often tip over. It worked okay and charged fine, but after about 2 weeks, I found the bottom spinning part BROKEN OFF in my pocket. The product still works but I am unable to adjust the strength on the bottom.