Vision Spinner 2 (1600 mAh)
The Vision Spinner 2 is a variable voltage 510 battery that lets you dial in your vapor with a twist of the base — no menus, no buttons to cycle. The 1600 mAh cell gives you all-day runtime in a slim body barely wider than a standard eGo, and the spin dial slides from 3.3V up to 4.8V so you can tune the draw for whatever 510 tank, clearomizer, or cartomizer you're running.
Quick start: twist the dial to 3.3V, screw on your atomizer, and click the button 5 times to unlock. Step the voltage up until the draw hits your sweet spot — higher warms things up but drains the battery faster.
Vision Spinner 2 Specs
| Property | Detail |
|---|---|
| Battery | 1600 mAh built-in |
| Voltage | Variable 3.3V – 4.8V, spin dial |
| Connection | 510 threaded — fits most tanks, clearomizers & cartomizers |
| Charger | Screw-on USB charger, 4.2V / 420mA |
| Charge time | Roughly 2–3 hours from empty |
| Colors | Assorted — choose at checkout |
Light Colors & Charge Levels
The button itself is the charge meter, so you always know where the battery stands at a glance:
| Light color | What it means |
|---|---|
| White | Fully charged |
| Blue | About halfway |
| Orange (red) | Under 30% — time to charge |
Built-In Safety
The Spinner 2 packs the protections you want in a daily-carry battery:
- Short-circuit protection — shuts down if it detects a short, then resets once the current is normal.
- Atomizer lock — hold the button 8 seconds to lock it out.
- Low-voltage cutoff — powers down below 3.3V to protect the cell.
- Over-discharge protection — turns off before the battery over-depletes; the LED flashes 5 times as a heads-up to charge.
- 5-click on/off — locks the button so it won't fire loose in a pocket or bag.
FAQ
| Q |
What atomizers and clearomizers fit the Vision Spinner 2?
Anything with a standard 510 thread — most clearomizers, tanks, cartomizers, and cartridges thread right on. If your atomizer is 510, it works.
|
| Q |
How do I use the Vision Spinner 2 and change the voltage?
Click the button 5 times to turn it on. Twist the dial on the bottom to set voltage — down toward 3.3V for a cooler draw, up toward 4.8V for a warmer one. Start low and work up until it feels right.
|
| Q |
How do I charge it, and how long does it take?
Screw the battery onto the included USB charger. From empty it's roughly 2 to 3 hours, and the button glows white once it's topped off.
|
| Q |
What do the Vision Spinner 2 light colors mean?
White is a full charge, blue is about halfway, and orange (sometimes it reads red) means you're under 30% and it's time to plug in.
|
Genuine Vision Spinner 2 build. For use by adults 21+.
