Vaporesso XROS Replacement Pods
The Vaporesso XROS Replacement Pod fits the XROS family of pod kits - XROS, XROS 2, XROS 3, XROS Mini, XROS 3 Mini, and XROS Pro. Vaporesso's COREX mesh coil runs through most of the resistance range, tuned for a best wattage rather than a wide range. The pods are top fill, and come in either 2ml or 3ml options.
- 5 core resistances, 0.6ohm to 1.2ohm, fit the full XROS lineup
- COREX mesh coil construction throughout
- A 0.4ohm pod is also available for the newer XROS 4 / XROS 4 Mini / XROS Pro generation
- Sold as a 4 Pack
XROS Pod Specs
| Pod | Best Wattage | Type | Fits |
|---|---|---|---|
| 0.6ohm XROS Pod | 21W | COREX mesh | Entire XROS series |
| 0.7ohm XROS Pod | Not separately published | Mesh (COREX line) | Not on Vaporesso's current official spec list - if your device came bundled with this resistance, it's likely a device-specific pack rather than a general XROS SKU |
| 0.8ohm XROS Pod | 16W | COREX mesh, MTL-leaning | Entire XROS series |
| 1.0ohm XROS Pod | 12W | COREX mesh, MTL | Entire XROS series |
| 1.2ohm XROS Pod | 10W | COREX mesh, tight MTL | Entire XROS series |
| 0.4ohm Pod | 25W | COREX 2.0 mesh | XROS 4, XROS 4 Mini, XROS Pro only - not for the XROS 3 or earlier generations |
Vaporesso publishes a single "best wattage" per resistance rather than a min-max range for the XROS line. The 0.4ohm pod is built for the newer COREX 2.0 deck (XROS 4 and up) - the wattage needed for the 0.4 ohm restricts it for use only with the 4 and newer models.
Compatible With
The whole XROS line: XROS Mini, XROS 2, XROS 3, XROS 3 Mini, XROS 3 Nano, XROS PRO, XROS 4, XROS 4 Mini, XROS 4 Nano, XROS 5, XROS 6 Mini, XROS Cube. One thing to watch - the 0.4ohm pod is built for the COREX 2.0 deck, so it belongs on an XROS 4 or newer. Every other resistance here works across the range.
Common Questions
| Q |
Which XROS pod fits my device?
The 0.6ohm through 1.2ohm pods fit the entire XROS line - XROS, XROS 2, XROS 3, XROS Mini, XROS 3 Mini, and XROS Pro. The 0.4ohm pod is newer-generation only (XROS 4, XROS 4 Mini, XROS Pro) and is explicitly not for the XROS 3 Mini or older gens.
|
| Q |
What does COREX mean?
It's Vaporesso's name for the mesh coil technology used across the XROS pods - designed for faster heat-up and more consistent flavor than a round-wire coil.
|
| Q |
Which pod should I use for nic salts?
The 1.0ohm or 1.2ohm pods are the tightest MTL builds in the lineup and the standard choice for nic salt e-liquid.
|
| Q |
How do I know which pod is currently in my device?
The resistance is printed on the pod itself near the base - match it against this list, and check your device's generation before ordering the 0.4ohm pod specifically.
|
For use by adults 21+.
