Vaporesso GTX Replacement Coils
The Vaporesso GTX coil deck is the plug-and-play system behind most current Vaporesso kits and tanks, from the TARGET and LUXE lines to the GTX Tank and GTX One. Seven resistance builds cover everything from a wide-open 0.15ohm mesh coil down to a tight 1.2ohm MTL build.
Coil version matters: older double-silicone GTX coils are not compatible with newer devices like the LUXE 80 and the GTX Go series pens, which use a redesigned coil deck. Check which version your tank or pod takes before ordering a replacement.
- 7 published resistance builds, 0.15ohm to 1.2ohm, plus GTX-2 mesh variants and an RBA deck
- Mesh and dual-wire Regular builds in one lineup
- Plug-and-play install, no threading or tools
- Sold as a Single Coil or a 5 Pack
GTX Coil Specs
| Coil | Wire / Type | Wattage Range | Best |
|---|---|---|---|
| GTX 0.15ohm Mesh | DTL / NiCr | 60-75W | 70W |
| GTX 0.2ohm Mesh | DTL / NiCr | 45-60W | 55W |
| GTX 0.3ohm Mesh | DTL / NiCr | 32-45W | 40W |
| GTX 0.6ohm Mesh | Restricted DTL / FeCrAl | 20-30W | 28W |
| GTX 0.8ohm Mesh | Restricted DTL / FeCrAl | 12-20W | 18W |
| GTX 1.2ohm Mesh | MTL / FeCrAl | 7-11W | 11W |
| GTX 1.2ohm Regular (dual-wire) | MTL / FeCrAl | 8-12W | 11W |
GTX-2 0.6ohm and 0.8ohm Mesh coils are also in the option list above for devices on the newer GTX-2 deck; Vaporesso hasn't published a separate wattage spec for those yet. The GTX RBA is a rebuildable deck (no fixed resistance) sold for DIY coil building.
Compatible With
Vaporesso XIRON, GTX One, GTX Tank 18 & 22, TARGET PM80, TARGET PM80 SE, TARGET PM30, GEN NANO 80W, LUXE X PRO, LUXE XR MAX, LUXE XR
Vaporesso LUXE X
(using XR Pods)
Vaporesso LUXE 80 S, LUXE 80, SWAG PX80
(not compatible with the 1.2ohm Regular coil)
Vaporesso LUXE PM40
(compatible with 0.6ohm, 0.8ohm, and 1.2ohm Mesh & Regular coils only)
Common Questions
| Q |
My GTX coil is the double-silicone version - will it fit my device?
Not always. Newer Vaporesso devices, including the LUXE 80 and the GTX Go series pens, use a redesigned coil deck that older double-silicone GTX coils don't seal against. Check which coil version your tank or pod ships with before ordering.
|
| Q |
What's the difference between GTX Mesh and GTX Regular?
Mesh coils use a flat mesh heating element for faster ramp-up and more even flavor. The 1.2ohm Regular is a dual-wire build aimed at a tighter, more traditional MTL draw. Both land in the same wattage range, so the choice comes down to draw style, not power.
|
| Q |
Can I use the GTX RBA to build my own coil?
Yes. The GTX RBA is a rebuildable deck for the same devices as the rest of the GTX line, sold separately from the pre-built coil heads.
|
| Q |
How do I know which resistance to reorder?
Check the coil currently installed in your tank or pod - the resistance is usually printed on it - and match it here, since most GTX devices only accept a narrow set of compatible builds.
|
For use by adults 21+.
