Skip to main content

WARNING: This product contains nicotine. Nicotine is an addictive chemical.

CALL US ON 469-828-7307
SMOK TFV12 Prince Replacement Coil

SMOK

SMOK TFV12 Prince Replacement Coil

4 (63 reviews) Write a Review
$2.99

ShippingFREE $95+ · ½-price $50+ · else $9.99DeliveryShips within 48 hrs (order by 12pm CT, Mon–Fri) · arrives in 2–7 business days. Shipping details

Key Specs

Resistance Options 0.12Ω, 0.15Ω, 0.17Ω, 0.2Ω, 0.4Ω
Wattage Range 30-120W
Draw Style DTL
Coil Type Mesh
Pack Size Single, 3 Pack

SMOK TFV12 Prince Replacement Coil

The SMOK TFV12 Prince Replacement Coil lineup covers the TFV12 Prince Sub-Ohm Tank and the SMOK Stick Prince Kit. Eleven resistance builds run from a tighter 0.4ohm draw down to a wide-open 0.12ohm cloud build, so picking one mostly comes down to how much airflow and vapor you want per pull.

Highlights
  • 11 resistance builds, 0.12ohm to 0.4ohm
  • Mesh, Clapton, and multi-core coil options in one lineup
  • Sold as a Single coil or a 3 Pack
  • Fits the TFV12 Prince Tank and SMOK Stick Prince Kit

TFV12 Prince Coil Specs

CoilResistanceBuildWattage RangeRecommended
V12-Prince T100.12ohmDecuple60-120W80-110W
V12-Prince Q40.4ohmQuadruple40-100W60-80W
V12-Prince X60.15ohmSextuple50-120W80-100W
V12-Prince M40.17ohmQuadruple30-70W45-55W
V12-Prince Mesh0.15ohmMesh40-80W60-70W
V12-Prince Strip0.15ohmStrip40-100W80-90W

The V12-Prince X2 Clapton, MAX Mesh, Dual Mesh, and Triple Mesh builds are also in the option list above. SMOK hasn't published a separate wattage spec for those variants, so check your device's resistance reading when you install one.

Compatible With

SMOK Stick Prince Kit
SMOK TFV12 Prince Tank

Common Questions

Q
Which TFV12 Prince coil should I start with?
If you're not sure, the 0.17ohm M4 or 0.15ohm Mesh are the most middle-of-the-road builds here, comfortable in the 45-70W window on most mods. The 0.12ohm T10 and 0.4ohm Q4 sit at opposite ends of the range: more airflow and lower resistance from the T10, a tighter, denser pull from the Q4.
Q
Do I need to prime a new coil before using it?
Yes. Add a few drops of e-liquid into the coil's juice ports and let it sit a few minutes before firing so the wicking material is saturated. A dry coil is the most common cause of a burnt first hit.
Q
Can I mix Single coils and the 3 Pack in one order?
Yes. Both pack sizes list the same coil types - Single buys one coil, 3 Pack buys three of the same build - so pick whichever matches how often you rebuild.
Q
Will these fit my SMOK Stick Prince Kit?
Yes. The SMOK Stick Prince Kit ships with the TFV12 Prince Tank, so this coil lineup is the correct replacement for either the kit or a standalone TFV12 Prince Tank.

For use by adults 21+.

Questions & Answers

QWhy so many coil versions, and how should I choose?

Central Vapors Team · Jun 27, 2026

AIt's one coil family in several resistances so it suits different setups — all fit the same tank. Go lower-ohm (~0.2–0.4Ω) for high-wattage, warm, direct-lung clouds, or higher-ohm (~0.8Ω+) for a cooler, tighter mouth-to-lung draw and longer battery life. Pick the resistance for your style, stay in its wattage range, and confirm it's the exact coil your device uses. — Central Vapors

QWhat are the steps to break in a new coil?

Central Vapors Team · Jun 27, 2026

APrime it: a few drops of juice on the exposed cotton, install, fill, and wait 5–10 minutes. Pull a couple of primer puffs with the device off (or at low power) to wick liquid in, then start vaping at the lower end of the wattage range. Refill before it runs dry. — Central Vapors

QWhat makes a coil taste burnt, and how do I avoid it?

Central Vapors Team · Jun 27, 2026

ABurnt taste comes from cotton heated while dry. Avoid it by priming (drops on the wicking holes plus a few minutes to soak after filling), starting at lower wattage, and never vaping with the juice below the wick ports. Once cotton is truly scorched it stays burnt, so prime every new coil properly. — Central Vapors

QWhat coil options and wattages are available?

Central Vapors Team · Jun 27, 2026

AOptions include the T10 Decuple (0.12Ω, 60–120W; recommended 80–110W) and the Q4 Quadruple (0.4Ω, 40–100W; recommended 60–80W) — both sub-ohm builds for big vapor and rich flavor. — Central Vapors

QWhich tank do TFV12 Prince coils fit?

Central Vapors Team · Jun 27, 2026

AThey fit the SMOK TFV12 Prince tank and the SMOK Stick Prince kit. — Central Vapors

Customer Reviews & Ratings Hide Reviews Show Reviews

4/5 63 Reviews
Write a Review
  • It works great

    Posted by Jenny on Oct 27th 2022

    It always works great.

  • They are good coils I'd buy them again

    Posted by Jenny on Sep 27th 2022

    I love the coils they work really well and I will definitely buy them again

  • TF V12 Prince Mesh Coils

    Posted by Ted on Aug 22nd 2022

    These are my favorite coils for the Prince tank. Great hit on low wattages. They arrived in short order and are my go to coil from my go to source.

  • So far so good!

    Posted by MariLynn Davenport on Aug 4th 2022

    Quick, easy delivery

  • Works as expected

    Posted by Unknown on Jun 10th 2022

    Works great

  • Not the coils I wanted but,

    Posted by Ted on Mar 14th 2022

    These were the only coils they had in stock for my rig. They weren't the ones I like but these worked well. Not quite the air draw I like but workable. They vape pretty well so no real complaints.

  • V12 PRINCE M4 COILS

    Posted by Kim Koon on Dec 7th 2021

    Better than any coil I've ever used. Last longer than others.

  • good coils

    Posted by clayton chapman on Aug 5th 2021

    great coils, good price

  • Best

    Posted by Thomas Ivers on Mar 31st 2021

    Best coils very good flavor draw and cloud production

  • Very good product

    Posted by Kathy Mincey on Jan 26th 2021

    Awesome coils, lasts about 2 weeks

Questions & Answers

Customers Also Bought

Best Sellers

!