SMOK Nord GT Pod System
The SMOK Nord GT is an 80W starter pod kit that packs a 2500mAh battery into something that still fits in your pocket. A step-less airflow ring lets you dial in anything from a tight restricted-lung pull to a wide-open direct-lung draw, and the 5ml side-fill pod runs SMOK's press-fit RPM 3 coils. A 0.96″ screen keeps your wattage and coil resistance in view, and USB Type-C gets you back to full quickly.
Specifications
| Spec | Detail |
|---|---|
| Dimensions | 105.6 x 33.5 x 25mm |
| Battery | 2500mAh built-in, rechargeable |
| Wattage Range | 5–80W |
| Voltage Range | 0.5–4.0V |
| Resistance Range | 0.15–2.5Ω |
| Pod Capacity | 5ml, side-fill |
| Pod Material | PCTG |
| Coil Series | RPM 3, press-fit |
| Airflow | Step-less adjustable ring |
| Display | 0.96″ screen |
| Connection | Magnetic pod |
| Body | Zinc-alloy |
| Charging | USB Type-C |
In the Box
1x Nord GT Device • 1x GT 5.0ml Pod Cartridge • 1x RPM 3 0.23Ω Coil (installed) • 1x RPM 3 0.23Ω Coil (spare) • 1x USB Type-C Charging Cable • User Manual
Compatible Coils
The Nord GT runs the full SMOK RPM 3 coil series — press-fit, so you pull the old one out and push the new one in, no screwing. Grab lower-resistance mesh coils for direct-lung clouds or a higher-resistance coil for a tighter draw.
FAQ
| Q |
What's the difference between the RDL and DTL settings?
It comes down to the airflow ring. Open it up for DTL (direct to lung) — a wide, airy draw straight to the lungs at higher wattage. Close it down for RDL (restricted direct lung) — a slightly tighter pull that still goes to the lungs but with more resistance. The ring is step-less, so you can land anywhere between the two.
|
| Q |
Which coils fit the Nord GT?
SMOK's RPM 3 series. They're press-fit into the pod, so swapping is quick — no threading. The kit includes two 0.23Ω coils to start, and the rest of the RPM 3 range covers everything from big clouds to a tighter mouth-to-lung style.
|
| Q |
How do I fill it and prime a new coil?
Lift the side-fill plug and top off the 5ml pod. When you drop in a fresh coil, put a couple of drops of e-liquid on the wicking holes and let it sit 5–10 minutes before your first pull so the cotton fully soaks. Firing a dry coil scorches the wick.
|
| Q |
How do I change the wattage?
The Nord GT runs 5–80W with adjustable wattage. Use the buttons to step the power up or down, and watch the 0.96″ screen for your current setting. As a rule of thumb, lower-resistance coils want more wattage and higher-resistance coils want less — start low and work up until the draw feels right.
|
For use by adults 21+. Battery and e-liquid sold separately where noted.
