Kanger ProTank Coils
The Kanger ProTank coil is the original clearomizer coil for the ProTank, ProTank 2, and ProTank 3 - classic, pre-sub-ohm hardware built for basic variable-voltage batteries rather than wattage-mode mods. Six resistances are available, all standard MTL builds.
- 6 resistances from 1.5ohm to 2.5ohm, including SOCC (Stainless-steel Organic Cotton Coil) versions
- Kanthal heating element with organic cotton wicking
- Built for basic eGo-style batteries, not variable-wattage mods
- Sold as a Single coil or a 5 Pack
ProTank Coil Options
1.8ohm, 1.5ohm, 2.2ohm, 2.2ohm SOCC, 2.5ohm, 2.5ohm SOCC
Kanger never published a wattage spec for these coils - the ProTank line predates variable-wattage mods and was designed to run off a simple variable-voltage battery, typically in the 3.3-4.2V range depending on resistance. If your battery is voltage-only, start low and increase gradually until the vapor and flavor feel right; if you're running it off a wattage-mode mod, start around 6-10W and adjust to taste.
Common Questions
| Q | What's the difference between the regular and SOCC coils? SOCC (Stainless-steel Organic Cotton Coil) uses a stainless-steel coil housing with organic cotton wicking instead of the earlier silica-wick design - it's Kanger's later, better-wicking version of the same resistance. |
| Q | Can I use a ProTank coil on a modern wattage-mode mod? Yes, as long as the mod can be set low enough - these coils weren't designed for wattage mode, so start around 6-10W and adjust in small steps rather than assuming a sub-ohm-style wattage range. |
| Q | Will these fit my ProTank 3? Yes, Kanger kept the same coil deck across the ProTank, ProTank 2, and ProTank 3. |
| Q | Why don't you list a wattage range for these? Kanger never published one - the ProTank predates wattage-mode vaping and was built around basic voltage batteries. We'd rather tell you that honestly than invent a number that isn't real. |
For use by adults 21+.
