Aspire Nautilus Replacement Coils
The Aspire Nautilus coil deck spans the long-running Nautilus tank family - Nautilus, Nautilus Mini, Nautilus 2, Nautilus X, Nautilus 2S, and Nautilus 3 all use variations of this coil. Six resistances cover classic BVC builds and newer mesh options.
Highlights
- 6 resistances: 3 classic BVC (Kanthal) builds, 3 newer mesh builds
- Spans the entire Nautilus family, though exact fit varies by generation
- MTL-focused, with the mesh builds edging toward a restricted DTL draw
- Sold in a 5 Pack
Nautilus Coil Specs
| Coil | Wattage Range | Type | Fits |
|---|---|---|---|
| 1.8 Ohm | 10-14W | BVC, Kanthal | Nautilus, Nautilus Mini, Nautilus 2, Nautilus 2S |
| 1.6 Ohm | 7-11W | BVC, Kanthal | Nautilus, Nautilus Mini, Nautilus 2 |
| 0.7 Ohm | 18-23W | Standard build | Nautilus 2, Nautilus X, Nautilus XS, Nautilus 2S |
| 0.3 Ohm Mesh | 23-28W | Mesh | Nautilus, Nautilus 2, Nautilus 2S, Nautilus 3 |
| 0.7 Ohm Mesh (2S Type) | 20-25W | Mesh | Nautilus 2S (also cross-listed for Nautilus 2/3 by some retailers) |
| 1.0 Ohm Mesh | 13-15W | Mesh | Broad Nautilus mesh-compatible generations (2/2S/3 platform) |
The Nautilus line has several generations with slightly different coil decks. Check which coils your specific tank shipped with (printed on the box or the original coil) before ordering a replacement, since not every resistance fits every Nautilus generation.
Common Questions
| Q |
How do I know which Nautilus coil fits my tank?
Check the resistance printed on your current coil or original packaging against the table above - the classic 1.6/1.8ohm BVC builds fit the original Nautilus and Nautilus 2, while the mesh builds are for the newer 2S and 3 generations.
|
| Q |
What's the difference between BVC and Mesh coils here?
BVC (Bottom Vertical Coil) is Aspire's classic Kanthal wick-and-wire build; the mesh coils use a flat mesh element for faster ramp-up and a bit more vapor at a similar or lower resistance.
|
| Q |
Which coil is best for nic salts?
The 1.6ohm or 1.8ohm BVC coils are the tightest MTL builds in the lineup and the standard choice for nic salt e-liquid.
|
| Q |
My coil tastes burnt right out of the box. What should I do?
Prime it first - add a few drops of e-liquid directly into the coil's wicking holes and let it sit 5-10 minutes before your first vape.
|
For use by adults 21+.
