- DIY SUPPLIES
- Vape MODS
- NEW ARRIVALS
The Vision Spinner Mini is 510 threaded and compatible with all eGo and 510 atomizers, cartomizers and clearomizers or tanks. You can use an eGo 510 Thread USB Charger to charge your Vision Spinner battery. The Vision Spinner Mini has a little less power at 850mAh so is best used for higher ohms.
•Short Circuit Protection: In case of a short circuit, the battery will automatically shut down. It will turn on again once the current is back to normal.
•Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again.
•Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
•Over-Discharge Protection: The Spinner battery will automatically turn off upon discharge to prevent it from overly depleting the power. The LED light will flash 5 times to remind you to charge your battery.
•The Vision Spinner also has a 5-click on/off safety feature that prevents accidental activation when your ecig is stored in your pocket or purse.
Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster. It is highly recommended that you start at 3.3 volts and increase the settings gradually until the vapor hits your sweet spot.