UWELL Caliburn G3 Replacement Pods | 4 Resistances
The G Pod Platform cartridges for UWELL's Caliburn G3 range, in four resistances from a loose restricted direct-lung 0.4ohm down to a tight 1.2ohm MTL.
- Four resistances: 0.4ohm, 0.6ohm, 0.9ohm and 1.2ohm
- Integrated FeCrAl mesh coil - no separate coil to buy
- The 0.4ohm is the larger 3.0 mL cartridge native to the G3 Pro
- One cartridge family covers the G3, G3 Lite, G3 Pro, GK3 and GK3 Tenet
- Single pod or 4-pack
Caliburn G3 Pod Specs
| Resistance | Capacity | Power | Coil | Draw |
|---|---|---|---|---|
| 0.4ohm | 3.0 mL | Up to 35W on the G3 Pro | FeCrAl mesh (integrated) | Restricted DTL |
| 0.6ohm | 2.5 mL | Up to 25W | FeCrAl mesh (integrated) | Loose MTL / RDL |
| 0.9ohm | 2.5 mL | Device max 25W | FeCrAl mesh (integrated) | MTL |
| 1.2ohm | 2.5 mL | Device max 25W | FeCrAl mesh (integrated) | Tight MTL |
Two capacity notes. The 0.4ohm is not a 2.5 mL G3 pod - it is the 3.0 mL GPP cartridge that ships native to the G3 Pro, and it is absent from UWELL's own G3 spec list. Separately, older G3 stock shipped as a 2.0 mL top-fill cartridge instead of the current 2.5 mL side-fill, so capacity can vary by production run. UWELL publishes a device output cap for these kits but no per-pod wattage range, so the Power column gives the cap the device actually drives the pod at rather than an invented range.
Compatible With
UWELL Caliburn G3, G3 LITE, G3 Pro, G3 Pro KOKO, GK3 and GK3 TENET pod systems.
Why Shop UWELL at Central Vapors
The G3 platform is UWELL's current volume seller and the cartridge naming is genuinely confusing, so we keep all four resistances on the shelf and spell out which is which. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q | Which resistance is closest to a cigarette draw? The 1.2ohm. The 0.9ohm is a traditional MTL, the 0.6ohm loosens up, and the 0.4ohm is a restricted direct-lung draw. |
| Q | Why is the 0.4ohm a different size? It is the 3.0 mL GPP cartridge built for the G3 Pro's higher output. The other three are the 2.5 mL G3 cartridge. |
| Q | Do these fit the GK3 and TENET? Yes - the G3, G3 LITE, G3 Pro, G3 Pro KOKO, GK3 and GK3 TENET all take this cartridge family. |
| Q | Is there a coil I can replace instead of the whole pod? No. The mesh coil is integrated, so the cartridge is the replaceable part. |
For use by adults 21+.
