SMOK TFV8 X-Baby Beast Replacement Coils | 4 Builds
The dedicated coil family for the TFV8 X-Baby tank, in four multi-core builds from a tight quadruple up to the sextuple-core T6.
- Four builds: X4 quadruple, T6 sextuple, Q2 dual and M2 dual core
- Built for the TFV8 X-Baby tank only - not the standard Baby Beast
- Four large wicking ports on SMOK's Baby-X coil structure
- Sold as a single coil or a 3-pack
X-Baby Coil Specs
| Coil | Resistance | Wattage | Best |
|---|---|---|---|
| X-Baby X4 (quadruple core) | 0.13ohm | 30-70W | 45-60W |
| X-Baby T6 (sextuple core) | 0.2ohm | 40-110W | 70-90W |
| X-Baby Q2 (dual core) | 0.4ohm | 40-70W | 50-60W |
| X-Baby M2 (dual core) | 0.25ohm | Not published | See note |
Two things worth knowing about this table. SMOK publishes the X-Baby X4 at 0.13ohm - the 0.15ohm X4 is a different part from the TFV8 Baby Beast coil family. The two families also reuse the same X4, T6, Q2 and M2 names at different specs, and the figures shown here previously were the Baby Beast ones; the T6 and Q2 bands above are the X-Baby figures. SMOK publishes no wattage whatsoever for the X-Baby M2 - it is specified for a 3.7V unregulated mech mod such as the SMOK Stick V8, so the only published limit is that device's fixed 3.7V output rather than a coil wattage. No wire alloy is published for these coils except Kanthal on the Q2. SMOK publishes no per-coil wattage for this series, so the figures above are the ones its distributors print on the packaging - a starting window, not a hard limit.
Compatible With
SMOK TFV8 X-Baby Tank only. X-Baby coils do not fit the standard TFV8 Baby Beast, the TFV8 Big Baby or the TFV12 Baby Prince - those take the separate Baby Beast coil family.
Why Shop SMOK at Central Vapors
The X-Baby and Baby Beast coil families share part names but not specs, which is exactly how people end up with a coil that will not seat. We keep the two listings separate and spell out the difference. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
| Q | Is the X4 a 0.13ohm or a 0.15ohm coil? The X-Baby X4 is 0.13ohm. A 0.15ohm X4 does exist, but it is the Baby Beast version for a different tank. Both share the same 30-70W rating, so the resistance is the only thing that tells them apart. |
| Q | Will these fit my standard Baby Beast tank? No. This coil family is built specifically for the TFV8 X-Baby tank, which uses a different coil structure from the Baby Beast, Big Baby and Baby Prince. |
| Q | What wattage should I run the M2 at? SMOK does not publish one. The M2 is specified for a 3.7V unregulated mech mod such as the Stick V8, where output is fixed by the battery rather than set by you. We would rather say that than print a number SMOK never published. |
| Q | Which coil should I pick for the biggest clouds? The T6 at 0.2ohm - six cores and the widest band of the four at 40-110W. |
For use by adults 21+.
