LOST VAPE Ultra Boost Replacement Coils
The Lost Vape Ultra Boost coil deck spans the URSA, Thelema, Gemini, BTB, and Centaurus lines. Five wattage classes, plus a rebuildable RBA deck, are available across the V2, V3, and V4 coil generations, all using the same press-fit installation.
- 5 wattage classes: M1, M2, M3, M4, and a dedicated MTL build
- Mesh coil construction across V2, V3, and V4 generations
- Press-fit installation, no threading
- Sold as a Single coil or a 5 Pack
Ultra Boost Coil Specs
| Coil Class | Resistance | Wattage Range |
|---|---|---|
| M1 | 0.3ohm | 30-40W |
| M2 | 0.6ohm | 20-28W |
| M3 | 0.15ohm | 40-70W |
| M4 | 0.2ohm | 40-60W |
| MTL | 1.0ohm | 8-15W |
| RBA | 0.15-3.0ohm (build your own) | Sold separately |
V2, V3, and V4 are generational updates to the same wattage classes above - an M3 coil runs the same 40-70W range whether it's V2 or V3. The exception is the Lost Vape Centaurus 80Q, which only accepts the V4 M6, M7, and M8 cores.
Compatible With
Lost Vape URSA QUEST 100W Kit
Lost Vape Thelema 80W Pod Mod
Lost Vape Gemini 80W Pod Mod
Lost Vape BTB 100W Kit
Lost Vape Orion Q-Ultra Pod System
Lost Vape Ultra Boost X Tank
Lost Vape URSA UB Pod Tank
Lost Vape Centaurus 80Q Kit
(Centaurus is only compatible with V4 M6, M7, and M8 coils)
Common Questions
| Q | What's the difference between the V2, V3, and V4 Ultra Boost coils? They're generational updates to the same wattage classes. If your device came with a V2 coil, a V3 or V4 coil of the same class (M3, M4, etc.) will generally fit and perform the same - the exception is the Centaurus 80Q, which only accepts the V4 M6, M7, and M8 cores. |
| Q | Which coil fits my Thelema or Gemini pod mod? Both use the standard Ultra Boost coil deck, so any M1 through M4 or MTL build listed here will fit. Pick the resistance that matches the wattage range you like to vape at. |
| Q | Is the RBA deck worth it? Only if you already build your own coils. It's a rebuildable base for the same Ultra Boost devices, sold separately from the pre-built coil heads, and lets you dial in resistance from 0.15 to 3.0ohm. |
| Q | How do I install a press-fit coil without damaging the pod? Push it straight down into the base until it seats flush - don't twist it. Twisting a press-fit coil is the most common way to crack the base or strip the seal. |
For use by adults 21+.
