KangerTech SSOCC Coil
The KangerTech SSOCC (Sub-Ohm Organic Cotton Coil) is the coil deck used across Kanger's Subtank and Toptank lines. It spans a wide resistance range, from sub-ohm direct-lung builds down to a temperature-control nickel coil.
- 8 resistance builds from 0.15ohm to 2.2ohm
- NiCr wire with Japanese organic cotton wicking on the standard builds
- A Ni200 nickel build for temperature-control mode
- Sold as a Single coil or a 5 Pack
SSOCC Coil Specs
| Coil | Wattage Range | Type | Draw |
|---|---|---|---|
| 0.2ohm | 25-80W | NiCr, organic cotton | DTL |
| 0.5ohm | 15-60W | NiCr, organic cotton | DTL |
| 0.5ohm (small SSOCC) | Not separately published | NiCr, organic cotton, shorter body | DTL |
| 0.5ohm Clapton | Not separately published | Kanthal Clapton, organic cotton | DTL |
| 1.2ohm | 10-25W | NiCr, organic cotton | MTL |
| 1.5ohm | 10-25W | NiCr, organic cotton | MTL |
| 0.15ohm NI (temp control) | Not separately published | Ni200 nickel, organic cotton | Temp control only |
| 2.2ohm | Not separately published | — | — |
The Ni200 nickel coil only works in a temperature-control mode that supports nickel wire - it won't fire correctly in standard wattage mode. Kanger's own spec sheets for the small-SSOCC, 0.5ohm Clapton, and 2.2ohm builds are no longer published; go by the resistance and your device's safe operating range if you run one of those.
Compatible With
Kanger's Subtank and Toptank tanks share this coil deck. In our catalog that is the Kanger Top Tank MINI and the Subvod Mega TC kit. If your Kanger tank takes a screw-in SSOCC head, this is the coil for it - check the resistance printed on the old coil before you order, because the deck spans everything from a 0.15ohm nickel build to a 2.2ohm MTL one.
Common Questions
| Q |
Which SSOCC coils fit my Subtank?
All eight resistances are built for the same SSOCC deck used across the Subtank and Toptank line, so any of them will thread in - the difference is draw style and wattage, not fit.
|
| Q |
Can I use the Ni200 coil in any mod?
Only in a mod with temperature-control mode that supports nickel wire. Firing it in standard wattage mode isn't accurate and isn't recommended.
|
| Q |
What's the difference between the Clapton and standard 0.5ohm coils?
Both run the same resistance, but the Clapton uses a wrapped wire construction for a bit more surface area and a slightly different flavor and vapor profile than the standard round-wire build.
|
| Q |
How do I pick between the 1.2ohm and 1.5ohm MTL coils?
Both are mouth-to-lung builds in a similar wattage window - it comes down to personal preference for draw resistance. Start with whichever your tank shipped with and compare.
|
For use by adults 21+.
