Kanger ProTank Coils
The Kanger ProTank coil is the original clearomizer coil for the ProTank, ProTank 2, and ProTank 3 - classic, pre-sub-ohm hardware built for basic variable-voltage batteries rather than wattage-mode mods. Six resistances are available, all standard MTL builds.
- 6 resistances from 1.5ohm to 2.5ohm, including SOCC (Stainless-steel Organic Cotton Coil) versions
- Kanthal heating element with organic cotton wicking
- Built for basic eGo-style batteries, not variable-wattage mods
- Sold as a Single coil or a 5 Pack
ProTank Coil Options
| Resistance | Build | Draw | Wattage Range |
|---|---|---|---|
| 1.5ohm | Kanthal, organic cotton | MTL | Not published by Kanger |
| 1.8ohm | Kanthal, organic cotton | MTL | Not published by Kanger |
| 2.2ohm | Kanthal, organic cotton | MTL | Not published by Kanger |
| 2.2ohm SOCC | Stainless-steel housing, organic cotton | MTL | Not published by Kanger |
| 2.5ohm | Kanthal, organic cotton | MTL | Not published by Kanger |
| 2.5ohm SOCC | Stainless-steel housing, organic cotton | MTL | Not published by Kanger |
Kanger never published a wattage spec for these coils - the ProTank line predates variable-wattage mods and was designed to run off a simple variable-voltage battery, typically in the 3.3-4.2V range depending on resistance. If your battery is voltage-only, start low and increase gradually until the vapor and flavor feel right; if you're running it off a wattage-mode mod, start around 6-10W and adjust to taste.
Compatible With
Kanger ProTank, ProTank 2 and ProTank 3. The same screw-in coil head also fits the Kanger EVOD tank, so it is the replacement coil for our Kanger EVOD Starter Kit and the EVOD Clone as well. The EVOD batteries we sell on their own (EVOD, EVOD Passthrough, EVOD Twist 2) pair with that same tank.
Common Questions
| Q | What's the difference between the regular and SOCC coils? SOCC (Stainless-steel Organic Cotton Coil) uses a stainless-steel coil housing with organic cotton wicking instead of the earlier silica-wick design - it's Kanger's later, better-wicking version of the same resistance. |
| Q | Can I use a ProTank coil on a modern wattage-mode mod? Yes, as long as the mod can be set low enough - these coils weren't designed for wattage mode, so start around 6-10W and adjust in small steps rather than assuming a sub-ohm-style wattage range. |
| Q | Will these fit my ProTank 3? Yes, Kanger kept the same coil deck across the ProTank, ProTank 2, and ProTank 3. |
| Q | Why don't you list a wattage range for these? Kanger never published one - the ProTank predates wattage-mode vaping and was built around basic voltage batteries. We'd rather tell you that honestly than invent a number that isn't real. |
For use by adults 21+.
