GeekVape Zeus Z Series Coils
Genuine GeekVape Z Series mesh coils for the Zeus Sub-Ohm Tank and compatible tanks, with Kanthal mesh heating elements and a bottom-loading, plug-and-play install — empty the tank first to avoid spillage.
Not compatible with the Z MAX tank. These are for the original Zeus / Z Series tank line only — check your tank's exact model before ordering.
Coil Options
| Coil | Resistance | Wattage Range |
|---|---|---|
| Z2 | 0.2Ω | 70-80W |
| Z1 | 0.4Ω | 60-70W |
| Z (standard) | 0.15Ω | 80-90W |
| Z Dual | 0.25Ω | 45-57W |
| Z XM | 0.4Ω | 50-60W |
| Z XM | 0.15Ω | 70-85W |
| Z XM Boost | 0.4Ω | check tank manual |
Compatible With
GeekVape Zeus Tank • Zeus Sub Ohm Tank • Zeus Sub Ohm SE Tank • Z Fli Tank • Obelisk Tank • P Tank • Aegis Legend III Kit • Aegis X Kit (Zeus Edition only) • Aegis Legend Kit (Zeus Edition only) • L200 Aegis Legend 2 Kit • S100 (Aegis Solo 2 Kit)
FAQ
| Q |
How do I install a Zeus coil?
Empty the tank first, then swap the coil from the bottom using the quick-change, non-threaded design — no tools needed.
|
| Q |
Do I need to prime a new coil before using it?
Yes. Apply a few drops of e-liquid directly to the exposed wicking holes and let it sit 5-10 minutes before your first vape. Firing a dry coil can cause a dry hit immediately.
|
Sold as a single coil or in a 5-pack. For use by adults 21+.
