VOOPOO TPP Coil Review: Performance and Durability

The VOOPOO TPP coil is a sub-ohm mesh coil built for direct-lung vaping on Drag-series and Argus hardware. Low resistance, high wattage, press-fit install, sold in packs of three. Here's how the four resistances differ, which one fits the way you vape, and what to expect on flavor, clouds, and coil life.

Key Takeaways

• The TPP line runs four mesh coils — DM1, DM2, DM3, and DM4 — each tuned to a different wattage band, so pick by how warm and how cloudy you want the draw.
• Press-fit install means no tools: pull the old coil, push the new one into the tank base, prime, vape.
• They pair best with higher-VG e-liquid and direct-lung devices like the Drag X Pro, Drag 3, and Argus MT.
• Expect roughly 1–2 weeks per coil depending on wattage, juice sweetness, and how much you vape. Priced at $9.99 per 3-pack.

Pros and Cons

• Pro — Strong flavor and clouds. The mesh element has a large heating surface, so e-liquid heats evenly and the draw stays consistent shot to shot.
• Pro — Tool-free swaps. Press-fit install is about as simple as coil changes get.
• Pro — Four resistances. One coil family covers everything from a cooler 32W restricted-DL draw to a hot 100W cloud setup.
• Pro — Wide device support. Fits most of the Drag and Argus lineup plus the TPP and MAAT tanks.
• Con — High-VG and higher-watt only. These are not made for mouth-to-lung vaping or high-PG/salt-nic juice.
• Con — Sweet juice gunks them faster. Heavy dessert and candy flavors shorten the lifespan on any mesh coil, and these are no exception.
• Con — Not cross-compatible with PnP. TPP and PnP coils are different families, so check what your tank takes before you order.

The VOOPOO TPP Coils

TPP coils use a low-resistance mesh build with organic cotton wicking. The mesh heating element and cotton work together for even saturation, which is what keeps the flavor full at higher wattages.

On compatibility, TPP coils fit devices such as the Drag X Pro, Drag 3, and the VOOPOO Argus MT kit. They ship in packs of three, so you've got replacements on hand. Because they run sub-ohm at higher wattage, they suit vapers chasing bigger clouds and bold flavor over a tight, cigarette-style draw.

Where they fit best is direct-lung (DL) inhalation. Compared with VOOPOO's PnP coils, the larger TPP mesh packs more heating surface, which generally means more vapor and bolder flavor. If you run a device in the Drag series or the Argus MT, these sub-ohm coils are the native match.

Which TPP Coil Is Best For You

The four coils overlap a little, but each one has a clear sweet spot. Pick by the wattage you like to run and the kind of draw you want.

• TPP-DM1 (0.15Ω, ~60–80W) — The all-rounder. Warm direct-lung draw with strong flavor and big clouds. If you're not sure where to start, start here.
• TPP-DM2 (0.2Ω, ~40–60W) — The lower-watt pick. A slightly tighter, restricted-DL draw that's easier on battery and juice while still giving plenty of flavor. Good for all-day vaping at moderate power.
• TPP-DM3 (0.15Ω, ~80–100W) — The cloud coil. Same resistance as the DM1 but tuned to run hotter, so it's for high-wattage setups and the biggest vapor. Burns through juice fast.
• TPP-DM4 (0.3Ω, ~32–40W) — The cooler, longer-life option. The highest resistance and lowest wattage in the line means a milder, more restricted draw and, for many vapers, the longest coil life of the four. A sensible choice if you want a calmer DL hit and fewer swaps.

One note on the DM1 versus DM3: both read 0.15Ω on the label, but VOOPOO rates the DM3 for the higher 80–100W band. If your device can push that power and you want maximum clouds, the DM3 is the one. For a warmer everyday draw, the DM1 is the easier coil to live with.

Key Features of the Mesh Coils

TPP coils are built around a mesh heating element, which lifts both vapor and flavor. The mesh gives a larger heating surface, so your e-liquid heats evenly for a steadier draw.

The press-fit install is the handy part. The design makes it easy to replace and install new coils, even if you're newer to vaping. Align the coil with the tank base, press it in, done. No tools, no fiddly steps.

Built for sub-ohm vaping, TPP coils are best paired with higher-VG e-liquids. That's what feeds the cloud production and keeps the mesh wicking properly at higher power.

Setting Up VOOPOO TPP Coils

Setup is quick because the coils drop straight into a wide range of VOOPOO tanks. No special tools needed.

The press-fit design makes swaps fast. Align the coil with the tank base, press it in, and you're good. First-timers can handle it without trouble.

Priming matters. Saturate the coil with e-liquid and wait about 10 minutes before your first draw so the cotton wick fully soaks. Skipping this is the main cause of an early dry hit and a coil that tastes burnt on day one.

Real-World Performance

Day to day, the strength here is flavor and a fast ramp. The mesh heats quickly, so the draw lands without a long warm-up. Across the 40–100W range the coils hold their character, and the 0.15Ω coils in particular put out the densest clouds.

The trade-off is the usual mesh trade-off: more power and bigger clouds mean more juice used and a shorter coil life. Run the resistance that matches your device and habits rather than always reaching for the hottest coil.

Longevity and Maintenance

Most TPP coils last between 1–2 weeks depending on how heavily you vape. Keeping the coil saturated and cleaning your tank regularly stretches that further. The lower-watt DM2 and DM4 generally outlast the high-watt DM3 simply because they run cooler.

Prime properly and you'll dodge most early burnouts. After filling, wait about 10 minutes so the cotton fully saturates. Dry hits cause a burnt taste and damage the coil, and very sweet e-liquids gunk the mesh faster, so expect shorter life from heavy dessert and candy juices.

Value for Money

At $9.99 per 3-pack, TPP coils land in normal sub-ohm coil territory on price. If you're weighing alternatives like the GeekVape Zeus Z coils, the TPP line earns its spot for the cloud and flavor output relative to the cost. For anyone already running a Drag or Argus device, they're the straightforward replacement.

Overall Verdict

The TPP line is a focused sub-ohm coil: warm, flavorful, cloud-heavy direct-lung vaping, with a resistance for almost every wattage band. The DM1 is the easy default, the DM3 is for cloud chasers, and the DM2 and DM4 are the lower-watt, longer-life picks. They need proper priming and a bit of upkeep, but the performance and price are solid for compatible VOOPOO hardware.

Frequently Asked Questions

These products are intended only for adults 21+. Nicotine is an addictive chemical.