Geekvape L200 Aegis Legend 2 200W Kit
The Geekvape Aegis Legend 2 is Geekvape's second run at the mod that made the Aegis line a household name, and they trimmed it down hard — about 30% lighter and 15% smaller than the original. It still runs on dual 18650 batteries, still shrugs off water, dust, and drops, and now pushes up to 200W through the included Z sub-ohm tank. If you searched for the aegis legend 2 by name, this is the full L200 starter kit: mod, tank, coils, and the spare parts to keep it running — sold here as the Geek Vape L200 Aegis Legend 2 200W kit.
Built to Take a Beating
Geekvape's whole thing is the tough-mod, and the Legend 2 keeps it. The zinc-alloy and leather chassis carries an IP68 rating, so splashes, dust, and the odd tip-off-the-counter don't end the party. The USB Type-C charging port sits behind a flip cover that seals it against water and grit, and the bottom-hinged battery door snaps shut on the dual 18650s. An "A-Lock" safety locks the fire button so it won't dry-fire in your pocket and cook a coil.
L200 Mod Specs
| Spec | Detail |
|---|---|
| Wattage | 5–200W |
| Batteries | Dual 18650 (not included) |
| Max voltage | 12V |
| Resistance range | 0.1–3.0ohm |
| Chassis | Zinc-alloy, IP68 rated |
| Display | 1.08" TFT color screen |
| Charging | USB Type-C with sealed flip cover |
| Connection | Threaded 510 |
Z Sub-Ohm Tank Specs
| Spec | Detail |
|---|---|
| Diameter | 26mm |
| Capacity | 5.5ml bubble glass |
| Glass | Pyrex-reinforced |
| Build | Stainless steel |
| Fill | Threaded top-fill, wide opening |
| Coils | Geekvape Z series, press-fit install |
| Airflow | Dual top airflow control ring |
Compatible Z Coils
The Z tank takes the full Geekvape Z (Zeus) coil family, so you can dial it from a warm restricted draw up to a big airy cloud:
Z 0.15ohm • Z 0.15ohm XM • Z 0.2ohm • Z 0.25ohm • Z 0.4ohm • Z 0.4ohm XM
In the Box
Aegis L200 mod • Z sub-ohm tank • 1x 0.2ohm Z coil (70–80W) • 1x 0.25ohm Z coil (45–57W) • 5.5ml replacement glass • spare parts pack • coil tool • USB Type-C cable • user manual
FAQ
| Q |
Does the Aegis Legend 2 come with batteries?
No. The L200 runs on two 18650 batteries and they're sold separately. Use a matched, high-drain pair from the same brand and keep them in a case when they're loose — never mix old and new cells.
|
| Q |
Which coils fit the included Z tank, and how do I change one?
The tank takes any coil in the Geekvape Z (Zeus) series — the 0.15, 0.2, 0.25, and 0.4ohm heads, including the XM versions. To change the coil, empty the tank, unscrew the base, and press the old coil out and the new one in — they're press-fit, so there's no threading to line up. The 0.2ohm and 0.25ohm in the box are a good starting spread.
|
| Q |
Is it really waterproof?
It carries an IP68 rating against water and dust and the charge port has a sealed flip cover, so a splash or a dusty toolbox won't faze it. Treat that as spill-and-drop insurance rather than a reason to go swimming with it — dry it off and you're good.
|
| Q |
How is it different from the first Aegis Legend?
Same rugged idea, smaller package — roughly 30% lighter and 15% smaller than the original. You also get the newer 1.08" color screen, USB Type-C charging, and the A-Lock fire-button safety.
|
| Q |
How do I unlock the Aegis Legend 2?
That's the A-Lock safety keeping the fire button from firing in your pocket. It also lets you lock the wattage so you don't nudge it mid-vape. The exact button combo is printed in the included user manual — a quick fire-button-plus-adjustment-button hold toggles it — and once it's unlocked the screen shows the setting live again.
|
| Q |
What's the difference between the L200 and the Aegis Legend 2 Classic?
Same Aegis Legend 2 mod either way. This L200 kit pairs it with the Geekvape Z sub-ohm tank for sub-ohm cloud vaping. The Classic kit swaps in a different tank aimed at a tighter, mouth-to-lung draw — so pick by how you like to vape, not by the mod.
|
For use by adults 21+.
