- DIY SUPPLIES
- Vape MODS
Completely innovative and new the Smok tank is like nothing you've seen before. There is a reason why it's called Taste Furious V4. The unique and cutting edge coil system, capable of running four different coil heads is game changer.
The top twists sideways to add juice fast and easy without having to disassemble the device. The stainless steel base is integrated with adjustable airflow control with four large air holes for a massive amount of airflow intake. The TFV4 is capable of holding up to 5ml of your favorite Central Vapors Ejuice. Finished with a breakthrough wide bore, double wall drip tip for max heat dissipation.
1 x SMOK TF-V4 tank
1 x TF-T3 coil with 0.2Ω
1 x TF-Q4 coil with 0.15Ω
1 x TF-R1 deck with pre-installed 0.85Ω coil
1 x replacement glass tube
1 x black vape band
1 x white vape band
1 x organic cotton pack
1 x replacement seal gasket for the top cap
1 x screwdriver
1 x Set of extra coils and O-rings
• Hardware: stainless steel
• Tube: Pyrex glass
• Wicking material: 100% organic cotton
• Liquid capacity: 5ml
• Coil head: disposable and rebuildable
• Thread: 510
• Tank dimensions: 73.5mm x 24.5mm
Featured below are additional coins not included but also compatible with TFV4 tank
Temperature Control Series
The SMOK TFV4 tank was designed specifically for the SMOK X Cube II which is a 160-watt temperature control mod. There are currently four atomizers in the SMOK series that are compatible with temperature control devices.
The RBA deck from SMOK is one of the best builds designed for sub-ohm vaping. There is enormous space so you have plenty of options for different build styles. Large juice flow holes ensure excellent wicking with no dry hits. Apart from the RBA that is included in the TFV4 kit, you have three more options that are sold separately.
Pure Organic Cotton Wicks
All SMOK TFV4 coils are wrapped with 100% pure organic cotton to produce a purer taste.
Eight Adjustable Air Flow Slots
There are four air slots evenly spaced around the drip tip plus four larger ones located at the base to allow you to adjust the amount of airflow two ways. Simply twist the drip tip or the dial at the base of the atomizer to cover or expose the slots completely or partially, depending on preference.
You can vape with all eight slots wide open for maximum vapor and flavor, or experiment with different flow sizes to find your sweet spot. With eight air slots on the tank and large chimneys on the SMOK coil heads, airflow is never an issue with the TFV4.
Double Layer Drip Tip
The drip tip of the SMOK TFV4 tank is like no other. Instead of a simple cylinder, the default drip tip is a double-layered configuration with an outer stainless steel tube and an inner layer of Pyrex glass. This means that your lips only touch the outer tube and the vapor stays cool even at higher wattages.
There is a one- or two-millimeter spacing between the outer and inner tubes that serve as a heat shield to prevent the outer tube from overheating and keep your warm vapor dry.
The airflow slots on the drip tip are a creative addition especially if you like vaping at high wattages. Keep them completely closed when vaping under 100 watts and adjust the opening once the drip tip gets too hot.
The SMOK TFV4 is compatible with 510 replacement drip tips.
Leak-Proof Top-Filling Design
The e-liquid slot on the top cap is leak-proof, the top cap is properly sealed when you close it, and the entire cap can be covered by a vape band to prevent it from accidentally opening.
The top cap design of the SMOK TFV4 is unlike most top-filling tanks. The top cover does not unscrew itself from the tank body. Instead, it is connected to the tank with a hinge so it easily slides out when you need to refill. Inside the cap is a silicone gasket with a large juice hole. The silicone gasket is flexible enough to accommodate most types of refilling medium – dropper, syringe or dripper bottle.
How To Fill The SMOK TFV4 Tank
Hold the tank with one hand and use the other to slide the top cap out counterclockwise.
Drop e-liquid through the slot on the side, making sure that you avoid getting any juice into the central airflow tube.
Slide the top cap back into place to lock the tank.
Let it stand for several minutes to get the wicks completely saturated.